Why use our Epoxy Flooring Calculator?
- The whole system, coat by coat Primer, base coat, flake, quartz or metallic broadcast, and one or two top coats, each with its own coverage, gallons and kits.
- Flake and metallic done properly Pounds of flake and boxes, or the metallic body coat and the pigment in grams and ounces.
- A drawing of your floor A cross-section from slab to top coat with the mils and coverage of each layer, redrawn as you type.
- US regional pricing 2026 planning ranges, a Northeast, Midwest, Southeast or West multiplier, labor, prep, overhead and profit, and your own prices.
- Kits, not just gallons Exact gallons and the kits to buy, rounded up, with 3 or 1.5 gallon kits or your own size.
- Free API and three languages A JSON API and an embed with no key, English, Hindi and Urdu (right to left), and no signup or ads.
How to use the Epoxy Flooring Calculator
Choose US or metric units, the epoxy type (100% solids, solvent-based or water-based) and what you broadcast: full or light flake, metallic, quartz or nothing. Enter the area in square feet, or switch to length and width, where 12.5 or 12' 6" both work.
Pick the base coat thickness (thin, standard or thick), the number of coats, and tick the primer if the slab needs one: moisture vapor, oil stop or standard. Choose the top coat (polyaspartic, polyurethane or clear epoxy) and tick a second top coat if you want one.
Set the surface (smooth, standard broom finish or rough and porous) and the waste (10, 15, 20% or your own). Rough concrete soaks up more epoxy, so its coverage drops. Every coverage rate and kit size can be overridden from your product data sheet.
Choose a region, residential or commercial labor, prep work and an overhead and profit percentage, or type your own prices. Read the gallons, kits and cost range, the cross-section, the material list and the step-by-step working for each layer.
Check it by hand: a 400 sq ft floor with a moisture vapor primer at 94 sq ft per gallon needs 400 ÷ 94 = 4.26 gallons, and 4.68 with 10% waste. That is 2 kits of 3 gallons. The base coat at 130 sq ft per gallon needs 400 ÷ 130 × 1.10 = 3.38 gallons, also 2 kits.
Gallons = (area × coats) ÷ coverage per gallon × (1 + waste ÷ 100) Kits = gallons ÷ kit size, rounded up Adjusted coverage = coverage × surface factor (smooth 1.00, broom 0.90, rough or porous 0.75) Flake (lb) = area × flake rate (light 1 lb per 25 sq ft, medium 1 per 17, full 1 per 12) Metallic body gallons = area ÷ 50 sq ft per gallon × (1 + waste ÷ 100) Pigment (g) = metallic gallons × 3.785 × grams per litre Installed cost = material + labor + prep, then overhead and profit on top
Worked examples
400 sq ft garage, 100% solids, full flake, one polyaspartic top coat, 10% waste: the primer takes 4.68 gallons (2 kits), the base coat at 130 sq ft per gallon takes 3.38 gallons (2 kits), the top coat at 200 sq ft per gallon takes 2.2 gallons (1 kit), and the flake is 33.3 lb (one 40 lb box). Materials come to about $960 to $1,740 and labor at $2 to $5 per sq ft adds $800 to $2,000, so the installed range is about $1,760 to $3,740, or $4.40 to $9.35 per sq ft.
1,000 sq ft basement, metallic: the primer takes 11.7 gallons (4 kits), the base coat 8.46 gallons (3 kits), the metallic body coat at 50 sq ft per gallon takes 22 gallons (8 kits), and the top coat 5.5 gallons (2 kits). At 75 g of pigment per litre that is 6,246 g, about 220 oz. The installed range is about $5,745 to $13,235.
5,000 sq ft commercial floor with primer, full flake and 2 top coats, labor at $4 to $8 and 15% overhead and profit: the primer takes 58.5 gallons (20 kits), the base 42.3 gallons (15 kits), the two top coats 55 gallons (19 kits) and the flake 417 lb (11 boxes). Materials are about $10,680 to $19,020, labor $20,000 to $40,000, overhead and profit about $4,600 to $8,900, for a total of about $35,300 to $67,900.
Good to know
- Coverage rates are typical ranges, not your product. Always confirm with the product data sheet. Rough or porous concrete absorbs more epoxy, and the surface factor here is a planning figure.
- My own assumptions: the prices for solvent-based epoxy, primers other than the moisture vapor one, polyurethane, clear epoxy, quartz and prep work, and the 130 sq ft per gallon default for a standard 100% solids base coat. Replace any of them with a quote.
- Prices are 2026 planning averages. Local supplier prices may vary. Grinding, crack repair and moisture testing are priced per sq ft as options, and stem walls, urethane cement and slab repair are not modeled.
Questions people ask
How much epoxy do I need for a 400 sq ft garage?
With a primer, one coat of 100% solids base at 130 sq ft per gallon, full flake, one top coat and 10% waste, about 4.7 gallons of primer, 3.4 of base and 2.2 of top coat. That is 2, 2 and 1 kits of 3 gallons, plus one 40 lb box of flake.
How many square feet does a gallon of epoxy cover?
It depends on the type. Water-based covers about 250 to 400 sq ft, solvent-based 200 to 250, and 100% solids 100 to 160. Moisture vapor primer covers about 94 and polyaspartic 133 to 320. Check your data sheet.
How much flake do I need for a garage floor?
A full broadcast takes about 1 lb per 12 sq ft, medium 1 per 17 and light 1 per 25. A 400 sq ft floor with a full broadcast takes 33.3 lb, which is one 40 lb box.
How much metallic pigment do I need?
Plan on 50 to 100 g per litre of mixed epoxy, with the body coat covering about 50 sq ft per gallon. For 1,000 sq ft at 75 g per litre that is about 6.2 kg, or 220 oz.
How much does an epoxy floor cost per square foot?
With the 2026 ranges here, a typical garage runs about $4.40 to $9.35 per sq ft installed nationally. The Northeast is 1.25 times higher and the Southeast 0.85 times, and metallic or commercial work costs more.
Do I need a primer under epoxy?
On a porous or damp slab, usually yes. A moisture vapor primer is the safe choice if the slab has any moisture problem. Test the slab first, and follow the product data sheet.
Is the calculator free, and can I use it in my own site?
Yes. There is no signup, no limit and no ads. There is a free JSON API and an embed, with no key. Please link back to this page when you show the results.
Epoxy Coverage Formula
Each layer is worked out the same way: area times the number of coats, divided by the coverage per gallon, then increased by the waste. For a 400 sq ft floor, one coat at 130 sq ft per gallon with 10% waste, that is 400 ÷ 130 × 1.10 = 3.38 gallons. Round up to whole kits: a 3 gallon kit means 2 kits.
Coverage depends on thickness. A US gallon spread 1 mil (0.001 in) thick covers 1,604 sq ft, so a 12 mil coat covers about 134 sq ft per gallon. The surface factor lowers the rate on rougher concrete: 0.90 for a broom finish and 0.75 for rough or porous. Rough or porous concrete absorbs more epoxy. Always confirm with the product data sheet.
How to Choose the Right Epoxy System
Start with the use. A home garage usually takes a primer, a 100% solids base, a full flake broadcast and one top coat. A basement or showroom might use a metallic body coat. A commercial or shop floor with heavy traffic often adds a second top coat, and polyaspartic is used where fast curing and UV stability matter.
Then check the slab. Moisture, oil and cracks decide the primer and the prep, and they are the most common reason an epoxy floor fails. Test for moisture before you buy, and read the product data sheet for coverage, thickness and recoat times. OSHA (US Occupational Safety and Health Administration) also publishes ventilation and respirator rules that apply to solvent-based products.
Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more