Drywall Calculator

How many sheets of drywall, sheetrock or plasterboard to buy for a room, with finishing materials and an optional cost.

ft

ft

ft

Each takes off about 20 sq ft (1.9 m²). Installers often hang sheets over openings and cut them out, so 0 is the safe choice.

Each takes off about 15 sq ft (1.4 m²).

Use 2 for a double layer, for example in fire-rated or sound-rated walls.

%

Cuts and damage. 10% is a common allowance for a regular room.

For the finishing cost. Leave empty to skip.

500 ft rolls in feet, 90 m rolls in metric.

Labour quoted per square foot. Leave empty to skip.

Sheets to buy

22

covering 612 sq ft

Wall area
432 sq ft
Ceiling area
180 sq ft
Sheets without extra
19.1
Sheet size used
32 sq ft
Joint compound (estimate)
6.1 gallons
Joint tape (estimate)
226 ft, or 1 rolls of 500 ft
Screws (estimate)
612

To cover 612 sq ft with 10% extra you need 22 sheets.

Add this calculator to your website

Free to use on any site or blog. Paste this code where you want the calculator to appear. It stays up to date, needs no account, and keeps your visitors' numbers in their own browser.

Preview

How it works

Drywall comes in standard sheets, most often 4 by 8 feet, which is 32 square feet. The calculator works out the area you want to cover, divides it by the area of one sheet and rounds up to whole sheets.

The wall area of a room is twice the length plus twice the width, times the ceiling height. The ceiling area is length times width. Add them for a full room. You can take off doors and windows, but many installers hang sheets across openings and cut them out afterwards, so the default is to take nothing off.

An allowance of 10% covers cuts, breakage and waste. If you are boarding a long straight wall with few corners you can go lower, and a room with many angles needs more. Choose two layers for fire-rated or soundproofing walls.

Finishing materials are estimated from the board area. The calculator uses about 10 gallons of joint compound and 370 feet of paper tape for every 1,000 square feet of board, and about one screw per square foot. These are common estimating figures. Enter your prices for sheets, compound, tape, screws and labour to see a cost.

Longer sheets mean fewer joints and less taping. A 4 by 12 foot sheet covers 48 square feet, but it is heavy to carry and handle, so many people prefer 8 or 10 foot sheets.

Check it by hand: the walls of a 15 by 12 ft room with 8 ft ceilings are 2 × (15 + 12) × 8 = 432 sq ft, and the ceiling is 15 × 12 = 180 sq ft, so 612 sq ft in all. A 4 by 8 ft sheet is 32 sq ft, and 612 ÷ 32 = 19.1 sheets. Add 10% for cuts and you need 21.04, so you buy 22 sheets.

Wall area = 2 × (length + width) × height
Ceiling area = length × width
Sheets = area × layers ÷ sheet area × (1 + extra ÷ 100), rounded up
Joint compound = board area × 0.01 gallon per sq ft (10 gallons per 1,000 sq ft)
Tape = board area × 0.37 ft per sq ft (370 ft per 1,000 sq ft)
Screws = about 1 per sq ft of board

Worked example

A room 15 by 12 feet with 8 foot ceilings: walls are 432 square feet and the ceiling is 180, so 612 square feet in all.

With 10% extra that is 673 square feet. A 4 by 8 sheet covers 32, so 673 ÷ 32 = 21.04, which rounds up to 22 sheets.

Good to know

  • The compound, tape and screw amounts are estimates from common rules of thumb. Corner bead, primer and sanding supplies are not included. Check the product labels for the coverage of the brand you buy, because lightweight compound, number of coats and the finish level change the amount.
  • Thickness is not part of the calculation. Walls are usually 1/2 inch (12.5 mm) and ceilings and fire-rated walls are often 5/8 inch (15 mm).
  • The cost rows use the prices you type. They do not use regional prices, because they vary a lot.

Questions people ask

How many sheets of drywall do I need for a 12x12 room?

A 12 by 12 foot room with 8 foot ceilings has 384 square feet of wall and 144 of ceiling, so 528 square feet. With 10% extra that is 581 square feet, or 19 sheets of 4 by 8.

What size drywall sheet should I use?

4 by 8 feet is the standard because it is easy to carry. Use 4 by 12 feet on tall walls or long runs to reduce joints, if you have help to handle them.

Are sheetrock, gypsum board and plasterboard the same?

Yes, in everyday use. Sheetrock is a brand name, gypsum board is the material and plasterboard is the common name in the UK and many other countries.

How do I calculate the cost of sheetrock installation?

Enter your price per sheet and your installer's price per square foot. The calculator multiplies the price per sheet by the sheets you buy, the labour price by the board area and adds the finishing materials if you enter their prices. Use the prices from your own quote, because they vary by place.

How much joint compound and tape do I need for drywall?

About 10 gallons of joint compound and 370 feet of paper tape for every 1,000 square feet of board. For the room above, which has 612 square feet, that is 6.1 gallons and about 226 feet of tape, which is one 500 foot roll.

Should I subtract windows and doors?

You can, but it is usually safer not to. Sheets are hung across openings and cut out, and the offcuts are often too small to use elsewhere.

How many drywall sheets do I need for just the ceiling?

Choose ceiling only. For a 15 by 12 ft room the ceiling is 180 sq ft. A 4 by 8 ft sheet covers 32 sq ft, so you need 5.6 sheets, and with 10% extra you buy 7. The calculator also lists about 180 screws and 1.8 gallons of joint compound.

Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more

Formulas and text last checked on 6 October 2026. Everything is calculated in your browser, so nothing you enter is sent or stored. Spotted a mistake? Tell us and we will fix it.