False Ceiling Calculator

Free false ceiling calculator: gypsum, PVC, metal tile and POP quantities, frame, cutouts, a layout drawing and a 2026 US cost range, with a free API.

Feet and inches work: 12.5 or 12' 6"

Board size
Board thickness
Furring channel spacing
Waste
Labor rate
Overhead and profit

Cutouts

Lights, vents, access panels and speakers are taken off the net area. They do not change the frame, which routes around them.

Custom prices (optional)

Leave blank to use the 2026 range for your region. A price you type is used as typed, with no regional multiplier.

Gross area
200 sq ft
Net area
200 sq ft
Gypsum boards to buy
8
Main channel, 10 ft
8
Furring channel, 10 ft
10
Perimeter channel, 10 ft
6
Hangers
24
Screws
256
Joint compound buckets
1
Material
$187 to $333
Labor
$400 to $1,000
Total installed
$587 to $1,333typical $960
$2.93 to $6.66 per sq ft

Boards and panels are laid out with balanced border cuts, so no narrow slivers.

Prices are 2026 planning averages. Local supplier prices may vary.

Ceiling layout, top view

20 ft10 ft6 ft
Room 1: Gypsum board · 20 ft × 10 ft
  • Main channel
  • Furring channel
  • Board seam

Room 1: 20 ft by 10 ft, Gypsum board, 8.

Material list

Step-by-step breakdown

The working with your numbers. It updates as you type.

  1. Area = 20 ft × 10 ft = 200 sq ft.
  2. Net area = 200 sq ft − cutouts 0 sq ft = 200 sq ft.
  3. Boards = 200 sq ft ÷ 32 sq ft per board = 6.25, rounded up = 7.
  4. With 10% waste: 7 × 1.1 = 7.7, rounded up = 8.
  5. Main channel rows = ⌈10 ft ÷ 4⌉ + 1 = 4. Length = 4 × 20 ft = 80 ft, ÷ 10 ft = 8 pieces.
  6. Furring rows = ⌈20 ft ÷ 2 ft⌉ = 10. Length = 10 × 10 ft = 100 ft, ÷ 10 ft = 10 pieces.
  7. Perimeter channel = 2 × (20 ft + 10 ft) = 60 ft, ÷ 10 ft = 6 pieces.
  8. Hangers = (80 ft ÷ 4) + 4 = 24.
  9. Screws = 8 × 32 per piece = 256.
  10. Joint compound and tape: 256 sq ft of board ÷ 500 = 1 of each.
  11. Material = $187 to $333.
  12. Labor = 200 sq ft net × $2.00 to $5.00 per sq ft = $400 to $1,000.
  13. Total installed = $587 to $1,333, typical $960.

Gypsum vs PVC vs Metal Tile vs POP: Which Is Best?

Gypsum boardPVC panelMetal tilePOP
LooksSmooth, paintablePanelled, wipe-cleanGrid with tilesSmooth, moldable
MoistureFair (5/8 in better)ExcellentGoodPoor
Access aboveCut a hatchLift a panelLift a tileCut a hatch
Best forLiving rooms, bedroomsKitchens, baths, basementsOffices, basementsDecorative work

False ceiling cost per sq ft (2026)

MaterialNationalSoutheastMidwestWestNortheast
Gypsum board$2.93 to $6.66$2.49 to $5.66$2.79 to $6.33$3.23 to $7.33$3.67 to $8.33
PVC panel$4.61 to $10.28$3.91 to $8.74$4.37 to $9.76$5.07 to $11.31$5.76 to $12.85
Metal tile$2.85 to $6.98$2.42 to $5.93$2.71 to $6.63$3.14 to $7.67$3.56 to $8.72
POP plaster$3.61 to $8.07$3.07 to $6.86$3.43 to $7.67$3.97 to $8.88$4.52 to $10.09

Installed cost per sq ft for a 200 sq ft ceiling at residential labor, from the prices in this tool.

Free API and embed

Send a GET request, no key needed. Please link back to this page.

https://ivorytool.com/api/false-ceiling?length=20&width=10&type=gypsum&waste=10&zip=90210

Returns quantities by material, the frame, cutouts and cost ranges as JSON. Types: gypsum, pvc, tile, pop. Units: units=us or metric. Add zip=90210 for the regional multiplier.

Embed this calculator on your site:

<iframe src="https://ivorytool.com/embed/false-ceiling-calculator" width="100%" height="900" loading="lazy"></iframe>
Add this calculator to your website

Free to use on any site or blog. Paste this code where you want the calculator to appear. It stays up to date, needs no account, and keeps your visitors' numbers in their own browser.

Preview

Why use our False Ceiling Calculator?

  • Four ceiling types in one tool Gypsum board, PVC panels, metal tiles on a suspended grid, and POP plaster, each with its own quantities.
  • A layout you can see A top view with main channels, furring, board seams and cutouts, redrawn as you type.
  • One room or many A single room, several identical rooms, or different rooms with their own ceiling type and cutouts.
  • US regional pricing 2026 price ranges, a Northeast, Midwest, Southeast or West multiplier, labor, overhead and profit, and your own prices.
  • Full cost breakdown A material list, labor, overhead, the installed range and the cost per square foot.
  • Free API, three languages, no ads A JSON API and an embed with no key, English, Hindi and Urdu (right to left), and no signup.

How to use the False Ceiling Calculator

Choose US or metric units, then One room, Several rooms or Known area. Pick the ceiling type: gypsum board, PVC panel, metal tile or POP. Enter the length and width, where 12.5 or 12' 6" both work, and the number of similar rooms if you have more than one.

Set the options for your type: board size and thickness, PVC panel width, tile size, furring spacing or POP thickness. Choose a waste allowance of 5, 10 or 15%, or your own number.

Add cutouts for lights, HVAC vents, access panels or speakers, each with a size and a count. They are taken off the net area. The frame still runs around them.

Pick a region, residential or commercial labor, an overhead and profit percentage, and type your own prices if you have a quote. Read the quantities, the cost range, the layout drawing, the material list and the step-by-step working.

Check it by hand: a 20 by 10 ft room is 200 sq ft. With a 4 sq ft light that leaves 196. A 4×8 board is 32 sq ft, so 196 ÷ 32 = 6.125, rounded up to 7, and with 10% waste 7 × 1.10 = 7.7, so 8 boards. That gives 8 × 32 = 256 screws.

Net area = length × width − cutouts
Boards = ⌈net area ÷ board area⌉, then × (1 + waste ÷ 100), rounded up
Main channel rows = ⌈width ÷ 4 ft⌉ + 1, length = rows × room length, pieces = ⌈length ÷ 10 ft⌉
Furring rows = ⌈length ÷ spacing⌉, length = rows × width, pieces = ⌈length ÷ 10 ft⌉
Perimeter channel = 2 × (length + width), pieces = ⌈perimeter ÷ 10 ft⌉
Hangers = main channel length ÷ 4 ft + main rows
Screws = boards × 32
POP plaster (lb) = net area × thickness in inches × 5.83 × (1 + waste ÷ 100)
Metal tile grid = the drop ceiling counts: mains 12 ft, cross tees 4 ft and 2 ft, wall angle 12 ft

Worked examples

12 × 10 ft bedroom, gypsum 4×8, 10% waste, 2 ft furring: the area is 120 sq ft, which is 4 boards and 5 with waste. The frame is 4 main rows (48 ft, 5 pieces), 6 furring rows (60 ft, 6 pieces), 44 ft of perimeter channel (5 pieces), 16 hangers and 160 screws, plus 1 bucket of joint compound. The installed range is about $368 to $829, or $3.06 to $6.91 per sq ft.

20 × 20 ft basement, metal tile 2×4, 10% waste: the area is 400 sq ft, which is 50 tiles and 55 with waste. The grid is 8 main runners, 45 cross tees of 4 ft, 7 pieces of wall angle and 24 hangers. The installed range is about $1,100 to $2,698.

100 sq ft PVC ceiling, 10 in panels, 10% waste: 12 panels and 14 with waste. The frame is 4 main channel pieces, 5 furring, 4 perimeter, 14 hangers and 140 screws. The installed range is about $472 to $1,053.

Good to know

  • This is a planning estimate for a flat ceiling. Bulkheads, coves, sloped ceilings and curved POP work need a drawing. Door openings are not taken off the perimeter channel.
  • My own assumptions: furring rows are counted from one wall, 1/2 in and 5/8 in board price steps and the 4×12 price, PVC screws, joint compound and tape, POP plaster density and prices, the mesh price, the 2×4 metal tile price, and the 4 by 3 room used for a known area. Replace any price with a quote.
  • Prices are 2026 planning averages. Local supplier prices may vary. Hanger spacing follows common practice for suspended systems under ASTM C636, but your supplier and local code decide the final layout.

Questions people ask

How many gypsum boards do I need for a 12 by 10 ft ceiling?

The area is 120 sq ft. A 4×8 board covers 32 sq ft, so you need 4 boards, and 5 with 10% waste. Subtract any light or vent cutouts first, since they reduce the net area.

How far apart do the channels go?

Main channels run 4 ft on center and are hung with wire every 4 ft. Furring channels clip across them, usually 2 ft on center for gypsum board. You can switch to 4 ft spacing in the calculator.

How do I calculate POP for a false ceiling?

POP is applied wet, so it is sized by area and thickness. At 1/2 in, a 100 sq ft ceiling needs about 100 × 0.5 × 5.83 = 292 lb of plaster, or about 321 lb with 10% waste, which is 13 bags of 25 lb.

What is the best material for a false ceiling?

Gypsum board suits living areas and takes paint well. PVC panels suit kitchens, baths and damp basements. Metal tiles suit offices and basements where you want access above. POP suits decorative work.

How much does a false ceiling cost per square foot?

With the 2026 ranges here, a gypsum ceiling installs for about $3 to $7 per sq ft nationally, including $2 to $5 of labor. The Northeast runs 1.25 times higher and the Southeast 0.85 times.

Do cutouts change the frame?

No. Cutouts come off the net area, so you buy fewer boards, but the channels, hangers and screws are unchanged because the frame routes around lights and vents.

Is the calculator free, and can I use it on my own site?

Yes. There is no signup, no limit and no ads. There is a free JSON API and an embed, with no key. Please link back to this page when you show the results.

False Ceiling Material Formula

Every ceiling type starts from the net area: length times width, minus the cutouts. Boards and panels are the net area divided by the area of one piece, rounded up, then increased by the waste and rounded up again. A 4×8 board is 32 sq ft, a 10 in by 10 ft PVC panel is 8.33 sq ft and a 2×4 metal tile is 8 sq ft.

The frame is counted from the room, not from the boards. Main channels run along the long side every 4 ft, with one extra row, so a 10 ft width has 4 rows. Furring channels run across them, perimeter channel goes around the walls, and hangers drop from the main channels every 4 ft. Pieces are 10 ft long. Metal tile uses a suspended grid with 12 ft mains and cross tees.

How to Avoid Border Slivers

If you start a layout at one wall, the last row can end up as a thin sliver that is hard to fix and looks wrong. Instead, centre the layout. Take the length left over after the whole pieces, add one piece, and divide by 2. That gives two equal borders on opposite walls, each at least half a piece wide.

A 15 ft width with 4 ft boards leaves 3 ft, so each border is (3 + 4) ÷ 2 = 3.5 ft. The layout drawing marks the border size, and the same rule is used for metal tiles.

False Ceiling Cost Per Square Foot (2026)

The reference table on this page shows the installed cost per square foot for each material and region, using a 200 sq ft ceiling and residential labor. Gypsum, PVC, metal tile and POP land in different ranges, and the region multipliers are Southeast 0.85, Midwest 0.95, West 1.10 and Northeast 1.25.

Material is the boards or panels, the frame, hangers, screws, compound and tape. Labor is $2 to $5 per sq ft residential and $4 to $8 commercial, charged on the net area. Overhead and profit of 10 to 20% can be added on top. Replace any price with your own quote.

Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more

Formulas and text last checked on 15 November 2026. Everything is calculated in your browser, so nothing you enter is sent or stored. Spotted a mistake? Tell us and we will fix it.