How it works
A block in a wall covers its own face plus a mortar joint. The area it covers is (block length + joint) times (block height + joint). Dividing the wall area by that gives the number of blocks.
A standard US block is called 8 by 8 by 16 inches, but its real size is 7⅝ by 7⅝ by 15⅝ inches. With a 3/8 inch joint each block takes up exactly 8 by 16 inches of wall, which is 1.125 blocks per square foot. Block thickness (4, 6, 8 or 12 inches) changes the wall width, not the number of blocks.
Mortar is worked out from the joints: each block has a bed joint along its length and a head joint along its height, both as deep as the block is thick. The estimate assumes the joints are filled across the whole thickness. If you bed only the outer edges of the block (face-shell bedding), you will use less. Type the yield from your bag label to turn the volume into bags, and your own prices to get a total cost.
Take off doors and windows if you want, then add an allowance for broken and cut blocks. The default is 5%. Choose the block size for your country, or enter the face of your own block.
Check it by hand: a wall 20 ft long and 8 ft high is 160 sq ft. A standard US block is 15.625 × 7.625 in, and with a 3/8 in joint each block takes up 16 × 8 = 128 sq in. A square foot is 144 sq in, so 144 ÷ 128 = 1.125 blocks per sq ft. That gives 160 × 1.125 = 180 blocks, and 5% extra is 9 more, so you buy 189.
Blocks per area = 1 ÷ ((block length + joint) × (block height + joint)) Blocks = net wall area × blocks per area × (1 + extra ÷ 100), rounded up Mortar volume = blocks × joint × (block length + block height) × thickness
Worked example
A wall 20 feet long and 8 feet high is 160 square feet. A standard US block with a 3/8 inch joint covers 8 × 16 inches, which is 0.889 square feet.
The wall takes 180 blocks. With 5% extra, buy 189.
For mortar, a 7⅝ inch thick block with a 3/8 inch joint carries about 0.038 cubic feet of mortar, so 189 blocks need about 7.3 cubic feet. If a bag makes 0.5 cubic feet, that is 15 bags.
Good to know
- Only whole blocks are counted. Half blocks, corner blocks and bond beam blocks are part of the same total, and you may want to order extra of those.
- The mortar figure is a volume for full bedding and does not include sand or cement ratios. Bags depend on the product, so use the yield printed on your bag. Add extra for mortar that is dropped or left in the mixer.
- Filling cores with grout or concrete, rebar and lintels are separate. Use the concrete calculator for the fill.
- Retaining walls and walls that carry loads need engineering. This calculator is only an estimate of block quantity.
Questions people ask
How many concrete blocks are in a square foot?
A standard 8 by 16 inch face with a 3/8 inch joint uses 1.125 blocks per square foot of wall. In metric, a 440 by 215 mm block with a 10 mm joint uses about 9.9 blocks per square metre.
How many blocks do I need for a 20x8 foot wall?
A 20 by 8 foot wall is 160 square feet, which is 180 standard blocks. With 5% extra, buy 189.
How much mortar do I need for concrete blocks?
Each block has a bed joint and a head joint as deep as the block is thick. This calculator multiplies that out for every block you buy. Enter the yield from your mortar bag to see the number of bags.
Are cinder blocks, concrete blocks and CMU the same?
In everyday use, yes. CMU stands for concrete masonry unit. Old cinder blocks were made with coal cinders, and modern blocks use concrete and aggregate.
Does block thickness change the count?
No. A 4 inch, 6 inch, 8 inch or 12 inch block all have the same face, so the count is the same. A thicker block gives a thicker wall.
What does 8 × 8 × 16 mean for a block?
It is the nominal size in inches: 8 thick, 8 high and 16 long, including the mortar joint. The real block is about 7⅝ × 7⅝ × 15⅝ inches, so with a 3/8 inch joint it covers 16 × 8 inches of wall.
How do I allow for doors and windows?
Enter the area of each opening and it is taken off the wall before the blocks are counted.
How many extra blocks should I order?
A common allowance is 5 to 10% for breakage and cuts. The calculator adds the percentage you choose.
How many 8 by 16 inch blocks are in a square foot of wall?
1.125, which is about 1 block per 0.89 sq ft, using a 3/8 inch mortar joint.
Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more