Nearby CGPA values
| CGPA | Percentage |
|---|---|
| 7.4 | 70.3% |
| 7.9 | 75.05% |
| 8.4 | 79.8% |
| 8.9 | 84.55% |
| 9.4 | 89.3% |
Turn a CGPA or SGPA into a percentage, or a percentage into a CGPA, using your board’s or university’s rule.
| CGPA | Percentage |
|---|---|
| 7.4 | 70.3% |
| 7.9 | 75.05% |
| 8.4 | 79.8% |
| 8.9 | 84.55% |
| 9.4 | 89.3% |
| CGPA | Percentage |
|---|---|
| 7.41 | 70.4% |
| 7.91 | 75.15% |
| 8.41 | 79.9% |
| 8.91 | 84.65% |
| 9.41 | 89.4% |
There is no single worldwide rule for turning a CGPA into a percentage. Each board or university publishes its own, and the one printed on your marksheet or transcript is the one that counts. Pick it from the list, or enter your university’s formula.
CBSE says the indicative percentage is 9.5 times the CGPA. VTU uses (CGPA − 0.75) × 10, the pattern many engineering universities following AICTE also use. Some universities simply multiply by 10, and many Pakistani and international ones use the 4.0 scale proportion, CGPA × 25.
In Pakistan, the HEC policy guidelines for the semester system give a table of grade points and percentages: A is 4.00 (85% and above), A− 3.66 (80 to 84%), B+ 3.33 (75 to 79%), B 3.00 (71 to 74%) and so on down to D at 1.00 (50 to 53%). The note under the table says a CGPA is given the minimum of the matching percentage, and that a CGPA of 3 is 71%.
The HEC text does not say what to do with a CGPA that falls between two grade points, such as 3.50. Two readings are in use. The band reading gives the grade whose grade point is the next one up, so 3.50 is A− and counts as at least 80%. The stricter reading gives the grade whose grade point you have reached, so 3.50 is B+ and counts as at least 75%. The tool shows both, and your university decides which applies.
SGPA (one semester) converts with the same rule as CGPA (all semesters together).
Check it by hand: with the CBSE rule, multiply the CGPA by 9.5. A CGPA of 8.4 gives 8.4 × 9.5 = 79.8%. To go back, divide the percentage by 9.5, so 75% is 75 ÷ 9.5 = 7.89. A different board or university may use another formula, and the formula used is shown under the result.
CBSE: percentage = CGPA × 9.5 VTU / AICTE pattern: percentage = (CGPA − 0.75) × 10 Direct: percentage = CGPA × 10 4.0 scale: percentage = CGPA × 25 HEC Pakistan: the minimum percentage of the matching grade (table in the examples) Percentage to CGPA: reverse the formula, for example CBSE: CGPA = percentage ÷ 9.5
CBSE: a CGPA of 8.4 is 8.4 × 9.5 = 79.8%. VTU: the same 8.4 is (8.4 − 0.75) × 10 = 76.5%.
Going back: 75% under CBSE is 75 ÷ 9.5 = 7.89, and under the VTU rule 75 ÷ 10 + 0.75 = 8.25.
HEC Pakistan: a CGPA of 3.50 sits between B+ (3.33) and A− (3.66). By the band reading it counts as at least 80%, by the stricter reading as at least 75%. The simple proportion would give 87.5%, which is why the rule matters.
HEC table: A 4.00 (85% and above), A− 3.66 (80 to 84%), B+ 3.33 (75 to 79%), B 3.00 (71 to 74%), B− 2.66 (68 to 70%), C+ 2.33 (64 to 67%), C 2.00 (61 to 63%), C− 1.66 (58 to 60%), D+ 1.30 (54 to 57%), D 1.00 (50 to 53%), F below 50%.
Use the third panel and write one semester per line, the SGPA and then the credits. The tool multiplies each grade by its credits, divides by the total credits, then applies the rule you chose. Leave the credits out and it takes a simple average.
Use your board’s or university’s rule. For CBSE multiply by 9.5; for VTU subtract 0.75 and multiply by 10; on a 4.0 scale many universities multiply by 25. Choose your rule above and the answer appears straight away.
The same way as CGPA. SGPA is the grade point average for one semester, so the same formula applies.
Under CBSE it is 80.75%, under the VTU rule 77.5%, and with the direct ×10 rule 85%. This is why the rule you use matters.
HEC gives a minimum percentage for each grade point. A CGPA of exactly 3.00 is 71% and 4.00 is 85%. For a value in between, such as 3.20, the band reading gives B+ and at least 75%, and the stricter reading gives B and at least 71%. Ask your university which it uses.
Use the second panel. It reverses the formula, for example 76% under CBSE is 76 ÷ 9.5 = 8.0.
Under the CBSE rule it is 8.4 × 9.5 = 79.8%.
Under the CBSE rule it is 9 × 9.5 = 85.5%. Other universities use different rules, so check yours.
Under the CBSE rule it is 7.5 × 9.5 = 71.25%.
Under CBSE, 75 ÷ 9.5 = 7.89. Under the VTU rule, 75 ÷ 10 + 0.75 = 8.25. With the direct ×10 rule it is 7.5.
No. CBSE publishes 9.5, VTU uses (CGPA − 0.75) × 10, and HEC Pakistan publishes a table. Your transcript or university notice decides which one counts for you.
Part of the guide: Math and study calculators: percentages, fractions, GPA and everyday sums