How it works
The volume of gravel is the area times the depth. Length and width are in feet and depth is in inches, so the depth is divided by 12. Suppliers sell by the ton or by the cubic yard, so the calculator gives you both. One cubic yard is 27 cubic feet.
To get weight, the volume in cubic yards is multiplied by the typical weight of the material. Crushed stone and gravel weigh about 1.4 tons per cubic yard, sand about 1.35, and topsoil about 1.1. Weight changes with grain size and moisture, so treat these as a guide and ask your supplier for the figure for their product.
The second panel turns cubic yards into tons and back, which answers the question of how many yards are in a ton. Choose Other if your supplier gives you their own number.
Add an allowance for compaction. Loose gravel packs down once it is spread and driven on, and a few percent is lost at the edges. The default is 10%.
Check it by hand: an area 12 by 10 ft laid 3 in deep is 12 × 10 × 0.25 = 30 cubic feet. Divide by 27 for cubic yards: 1.11. Add 10% and you get 1.22 cubic yards. Gravel weighs about 1.4 tons per cubic yard, so 1.22 × 1.4 = 1.71 tons.
Cubic feet = length (ft) × width (ft) × depth (in) ÷ 12 Cubic yards = cubic feet ÷ 27 Tons = cubic yards × tons per cubic yard (gravel about 1.4) Order = volume × (1 + extra ÷ 100)
Worked example
A path 12 feet long, 10 feet wide and 3 inches deep holds 12 × 10 × 3 ÷ 12 = 30 cubic feet, which is 1.11 cubic yards.
With 10% extra that is 1.22 cubic yards. Gravel at 1.4 tons per cubic yard comes to about 1.71 tons.
Good to know
- Weights per cubic yard are typical figures for loose material. Wet sand and dense crushed stone can weigh noticeably more.
- The calculator does not allow for the base layer, fabric or edging. Work out each layer on its own.
- In the metric panel a tonne is 1,000 kilograms. A US ton is 2,000 pounds, which is about 0.907 tonnes.
Questions people ask
How many tons of gravel do I need for a driveway?
Multiply length, width and depth to get cubic yards, then multiply by about 1.4 tons per cubic yard. A driveway 40 feet long, 10 feet wide and 4 inches deep is about 4.9 cubic yards, or 6.9 tons. With 10% extra, order about 7.6 tons.
How many cubic yards are in a ton of gravel?
About 0.71 cubic yards, because gravel weighs about 1.4 tons per cubic yard. One ton of sand is about 0.74 cubic yards.
How deep should gravel be?
Garden paths and beds are usually 2 to 3 inches. Driveways and parking areas need 4 to 6 inches over a firm base. Your supplier can suggest a size of stone for the use.
Does this work for sand, topsoil and dirt?
Yes. Pick the material from the list. Sand is about 1.35 tons per cubic yard and topsoil about 1.1. Use the Other option if your supplier quotes a different weight.
Is a ton the same everywhere?
No. A US ton is 2,000 pounds. A metric tonne is 1,000 kilograms, which is 2,205 pounds. Choose the units that match your supplier.
How much gravel do I need for a path 20 feet long and 3 feet wide?
At 4 in deep that is 20 × 3 × 4 ÷ 12 = 20 cubic feet, or 0.74 cubic yards. With 10% extra that is 0.81 cubic yards. At about 1.4 tons per cubic yard of gravel, you order about 1.14 tons.
Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more, Garden and lawn calculators: soil, mulch, sod, fertilizer and planting dates