Why use our Paver Calculator?
- Waste for each pattern Running bond, stacked, herringbone 90°, herringbone 45°, basket weave and random each get their own waste, with extra for curves and steps.
- A drawing of your pattern A live diagram of the pattern you picked, labeled with its waste, with a text summary for screen readers.
- The whole material list Pavers, compacted base, bedding sand, polymeric sand, edge restraint, spikes, filter fabric and excavation, all from one area.
- Installed cost Material, labor, optional excavation and overhead, as a low to high range with the cost per square foot.
- US regional pricing Pick a region or enter a ZIP in the API. Northeast costs run higher and Southeast lower. Type your own price for any line.
- Any shape A rectangle, a circle, several areas for an L-shaped patio, or a known area. Feet and inches or metric.
- Free API, three languages, no ads A JSON API and an embed with no key, English, Hindi and Urdu (right to left), no signup and no limits.
How to use the Paver Calculator
Choose the shape: rectangle, circle, several areas or a known area. Enter the sizes in feet and inches, or switch to metric. Pick the paver size, the joint and the laying pattern. The results update as you type, so there is no Calculate button.
Pick a pattern. Each one has its own waste: running bond and stacked 5 to 7%, herringbone 90° 10 to 12%, basket weave 7 to 10%, and herringbone 45° and random 15 to 20%. The calculator uses the middle of the range, or choose the low or high end or type your own. Curves add 5% and every step or inset adds 5%.
Pick the base depth for the job: 4 inches for a patio or walkway, 6 to 8 inches for a driveway and 10 inches for heavy vehicles. Bedding sand is 1 inch and never more than 1 1/2 inches. Choose how many sides are open, so the edge restraint is counted for them.
Read the cards for pavers to order, base gravel in cubic yards and tons, bedding sand, polymeric sand bags, edge restraint sections, fabric and excavation. The material list prices each line, and the total gives a low to high installed cost. Copy the result or open the step-by-step working.
Check it by hand: a 4 by 8 inch paver with a 1/4 inch joint covers 4.25 × 8.25 ÷ 144 = 0.2435 sq ft. A 12 by 12 ft patio is 144 sq ft, so it needs 144 ÷ 0.2435 = 592 pavers. Add 6% for running bond and order 627.
Pavers = area ÷ ((length + joint) × (width + joint) ÷ 144) × (1 + waste ÷ 100) Waste = pattern waste + 5% for curves + 5% for each step or inset Base gravel (CY) = area × (depth ÷ 12) ÷ 27; tons = CY × 1.4 × 1.20 for compaction Bedding sand (CY) = area × (depth ÷ 12) ÷ 27 × 1.10; tons = CY × 1.35 Polymeric sand bags = ⌈area ÷ coverage per 50 lb bag⌉ Edge restraint sections = ⌈perimeter of open sides ÷ 8 ft⌉; spikes = one every 12 in Filter fabric = area × 1.15 Excavation (CY) = area × ((base + sand + paver thickness) ÷ 12) ÷ 27 × 1.30
Worked examples
A 12 by 12 ft patio in running bond with 4 by 8 inch pavers is 144 sq ft. It needs 592 pavers, 627 with 6% waste. The 4 inch base is 1.78 cubic yards, about 3.0 tons, and the 1 inch sand bed is 0.49 cubic yards, 0.66 tons. Add 3 bags of polymeric sand, 48 ft of edge restraint (6 sections), 166 sq ft of fabric and 4.3 cubic yards of excavation. Installed cost is about $1,616 to $3,563.
A 20 by 20 ft driveway in herringbone 90° with 80 mm pavers is 400 sq ft. It needs 1,643 pavers, 1,824 with 11% waste, on a 6 inch base of 7.41 cubic yards, about 12.4 tons. Sand is 1.36 cubic yards, 7 bags of polymeric sand, 80 ft of edge restraint (10 sections) and 16.3 cubic yards to dig. Installed cost is about $4,532 to $10,057.
A round fire pit area 10 ft across is 78.5 sq ft with a 31.4 ft edge. Curves add 5%, so running bond waste is 11% and the order is 359 pavers. Base is 0.97 cubic yards, 1.6 tons, with 2 bags of polymeric sand and 4 edge sections. Installed cost is about $913 to $2,003.
Good to know
- Waste figures and prices are 2026 planning averages. Local supplier prices, delivery and the real site vary, so confirm with a supplier before you order. Always order from the same dye lot.
- Base depth must suit the soil, frost and traffic. Soft or clay soil and heavy vehicles need more. Follow the paver maker's guide and local rules. Bedding sand should be coarse concrete sand to ASTM C33 and never thicker than 1 1/2 inches.
- The polymeric sand coverage is 60 sq ft per 50 lb bag at a 1/8 to 1/4 inch joint, and it changes with the joint width. Known area mode estimates the perimeter from a 4 by 3 shape. For joined areas, pick fewer open sides.
- The tool does not design drainage, slope or retaining walls, and it assumes square-edged pavers. It is an estimate for planning, not an engineering design.
Questions people ask
How many pavers do I need for a patio?
Divide the area by the coverage of one paver with its joint, then add the waste for your pattern. A 4 by 8 inch paver with a 1/4 inch joint covers 0.2435 sq ft, so a 144 sq ft patio needs 592 pavers, or 627 with 6% waste.
How much waste should I add for each paver pattern?
Running bond and stacked bond need 5 to 7%. Herringbone 90° needs 10 to 12%, basket weave 7 to 10%, and herringbone 45° and random 15 to 20%. Curves add 5% and each step or inset adds 5% more.
How deep should the base be under pavers?
Use 4 inches of compacted gravel for a patio or walkway, 6 to 8 inches for a driveway and 10 inches for heavy vehicles. Add 1 inch of bedding sand on top. Go deeper in soft soil or where frost is deep.
How many tons of gravel do I need for a paver base?
Multiply the area by the depth in feet and divide by 27 for cubic yards, then multiply by 1.4 tons and by 1.20 for compaction. A 300 sq ft patio with a 4 inch base needs 3.7 cubic yards, about 6.2 tons.
How much polymeric sand do I need?
About one 50 lb bag covers 60 sq ft at a 1/8 to 1/4 inch joint. Tight joints cover more, up to about 100 sq ft, and wide joints much less. A 300 sq ft patio needs 5 bags.
What is the difference between polymeric sand and regular sand?
Polymeric sand has a binder that hardens when wet, so it locks the joints and resists weeds, ants and washout. Regular sand stays loose. Use coarse concrete sand under the pavers and polymeric sand in the joints.
How much does a paver patio cost per square foot?
Installed cost is often about $11 to $25 per sq ft in this tool, from $3 to $18 for the pavers and $6 to $18 for labor. The Northeast runs about 25% higher and the Southeast about 15% lower.
Is the Paver Calculator free, and can I use it on my site?
Yes. There is no signup, limit or ad. A free JSON API and an embed work without a key. If you show the results, please link back to this page.
How to Calculate Pavers, Base, and Sand
Start with the area. A rectangle is length times width, a circle is π times the radius squared, and an L-shape is two rectangles added together. Then work out the area of one paver with its joint, divide, and add the waste for your pattern.
The layers under the pavers follow from the same area. Base gravel is the area times the depth, with 20% added because it compacts. Bedding sand is a 1 inch layer with 10% extra. Fabric is 15% wider than the paved area, and edge restraint runs along every open side in 8 foot sections.
Polymeric Sand vs Regular Sand
Regular concrete sand goes under the pavers as the bedding layer. It is coarse, drains well and lets you screed the pavers level. It is not meant for the joints, because it washes out and lets weeds grow.
Polymeric sand is fine sand with a binder. You sweep it into the joints, compact the pavers, mist it with water and it sets firm. It holds the pavers together and blocks weeds and ants. Tight joints take about 90 sq ft per bag, a 1/4 inch joint about 60 and a wide joint far less.
Choosing a Paver Pattern
Running bond and stacked bond are the simplest and waste the least. Running bond offsets each row, which looks better and holds well. Stacked bond lines everything up in a grid and is best for light foot traffic.
Herringbone locks tightly, so it suits driveways, but the 45° version needs diagonal cuts along every edge and wastes 15 to 20%. Basket weave and random patterns look classic and mixed. Plan extra pavers for curves and steps, and keep a few spares for repairs.
Edge Restraint, Fabric and Excavation
Edge restraint keeps the pavers from spreading. It is spiked into the base about every 12 inches along every open side. A side that meets a wall or a curb does not need it, so choose fewer open sides.
Filter fabric under the base stops soil from mixing into the gravel. To find the dig, add the base, the sand and the paver thickness, then multiply by the area. Dug soil fluffs up by about 30%, so plan for the larger load when you order a dumpster or truck.
Checking Your Order
Before you buy, check the pavers per pallet, because a pallet is often 90 to 150 sq ft. Round up to a whole pallet if the supplier does not split them. Check the thickness too: 60 mm pavers suit patios and 80 mm pavers suit driveways.
Ask the supplier whether gravel is sold by the ton or the cubic yard, and whether delivery is extra. Prices vary a lot between regions and suppliers, so type your own price into any line to see the total change at once.
Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more