How it works
In a wall, each brick takes up its own face plus one mortar joint. So the area covered by one brick is (brick length + joint) times (brick height + joint). Dividing the wall area by that gives the number of bricks.
The wall area is the length times the height, less the area of doors and windows. If your wall is two bricks thick, as in a one-brick wall where bricks lie across each other, the count doubles. Choose the double layer option for that.
Some bricks always break or need cutting, so the calculator adds an allowance and rounds up. The default is 5%. Raise it for a wall with lots of corners, arches or decorative patterns.
Bricks vary by country. Pick a standard size, or choose Other and enter the face of your own brick, which is the long side by the short side you see in the wall.
Check it by hand: a US modular brick is 7⅝ by 2¼ in. With a 3/8 in joint on each side it takes up 8 in by 2⅝ in, which is 21 sq in. A square foot is 144 sq in, so 144 ÷ 21 = 6.857 bricks per sq ft. A wall 20 ft long and 8 ft high is 160 sq ft, which needs 160 × 6.857 = 1,097 bricks. Add 5% for waste and you buy 1,152.
Bricks per area = 1 ÷ ((brick length + joint) × (brick height + joint)) Bricks = net wall area × bricks per area × layers × (1 + extra ÷ 100)
Worked example
A wall 5 metres long and 2.4 metres high is 12 square metres. A UK brick, 215 by 65 mm, with a 10 mm joint covers 225 × 75 mm, so 59.3 bricks fill each square metre.
The wall takes 712 bricks. With 5% extra you buy 747.
Good to know
- The calculator counts only the bricks. Mortar, ties, lintels and damp-proof course are separate.
- Cavity walls have two leaves. Calculate each leaf separately, or choose the double layer option when both leaves use the same brick.
- Bond patterns such as Flemish bond use header bricks that change the count slightly. Add a little more if your bond has many headers.
Questions people ask
How many bricks are in a square metre?
About 59 for a UK standard brick with a 10 mm joint in a single-layer wall. A one-brick thick wall takes about 118.
How many bricks per square foot?
A US modular brick with a 3/8 inch joint needs about 6.9 bricks per square foot of wall face. Add waste to that.
How many bricks do I need for a 20 by 8 foot wall?
That is 160 square feet. At 6.9 bricks per square foot you need about 1,098 bricks, or 1,153 with 5% extra.
Should I count the mortar joint?
Yes, it is included in the calculation. A thicker joint means you use fewer bricks. Most joints are 3/8 inch or 10 mm.
Why does the mortar joint change the number of bricks?
Each brick takes up its own face plus one joint. A US modular brick (7⅝ by 2¼ in) with a 3/8 in joint covers 8 by 2⅝ in, which is 21 sq in, so you get 6.86 bricks per sq ft. If you ignored the joint, the brick alone is 17.16 sq in, or 8.39 per sq ft, and you would order about 22% too many.
Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more