How it works
Sod is sold in rolls or slabs of a set size, and by the pallet. The calculator takes the area of your lawn, adds an allowance for cuts and edges, and divides by the area of one roll to give a whole number of rolls. If you enter the area of a pallet, it also tells you how many pallets that is.
Grass seed is sown by weight over the area. The calculator multiplies the area in thousands of square feet by the seeding rate for the grass type. Tall fescue is sown at about 6 pounds per 1,000 square feet, and a small seed like Kentucky bluegrass at about 2 pounds. Overseeding an existing lawn takes about half the rate for a new one.
Sod gives an instant lawn and is laid at once, while seed is cheaper and needs weeks to establish. Whichever you choose, prepare the soil first. Loosen the top few inches, level it, and water well. Lay sod within 24 hours of delivery in hot weather.
Check it by hand: a lawn of 50 by 30 ft is 1,500 sq ft. Adding 5% extra gives 1,500 × 1.05 = 1,575 sq ft. A roll covers 10 sq ft, so 1,575 ÷ 10 = 157.5, which rounds up to 158 rolls, or 1,580 sq ft. For seed, tall fescue at 6 lb per 1,000 sq ft gives 1,500 ÷ 1,000 × 6 = 9 lb, and 9 × 0.4536 = 4.08 kg.
Rolls = lawn area × (1 + extra ÷ 100) ÷ area of one roll, rounded up Seed (lb) = area in sq ft ÷ 1,000 × rate (lb per 1,000 sq ft) Overseeding rate ≈ half of the new-lawn rate
Worked example
A lawn of 50 by 30 feet is 1,500 square feet. With 5% extra it needs 1,575 square feet of sod. In rolls of 10 square feet that is 158 rolls, or 1,580 square feet, which is a little over 3.5 pallets of 450 square feet.
The same lawn sown with tall fescue at 6 pounds per 1,000 square feet needs 9 pounds of seed. Overseeding it takes about 4.5 pounds.
Good to know
- Seeding rates depend on the grass blend, the season and the soil. Use the rate on the seed bag when it is different from the typical figure here. Seed blends are often mixed, with a lower rate for each type.
- Sod size and pallet area differ by farm. The 10 square foot roll and the 450 square foot pallet are only common examples, so check with your supplier.
- Slopes, trees and flower beds reduce the area. Measure those and take them off, or split the lawn into rectangles and add them up.
Questions people ask
How much sod do I need for 1,000 square feet?
About 1,050 square feet with 5% extra, which is 105 rolls of 10 square feet, or a little over 2 pallets.
How much grass seed do I need per 1,000 square feet?
It depends on the grass. About 6 pounds of tall fescue, 5 of bahiagrass, 2 of Kentucky bluegrass, bermudagrass or zoysia, and half a pound of centipedegrass.
How many square feet are in a pallet of sod?
Often 400 to 500 square feet, but it differs by farm and by the type of turf. Ask your supplier for the exact area.
How much seed do I need to overseed a lawn?
About half of the rate you would use for a new lawn. For tall fescue that is around 3 pounds per 1,000 square feet.
How many 10 sq ft sod rolls do I need for 1,000 sq ft?
1,000 ÷ 10 = 100 rolls, and 5% extra makes 105.
Part of the guide: Garden and lawn calculators: soil, mulch, sod, fertilizer and planting dates