How it works
A square foot measures area, which is length times width. A linear foot measures only length. The two cannot be converted without a third number, which is the width of what you are measuring. A board 6 inches wide and 1 foot long covers half a square foot.
To go from square feet to linear feet, divide the area by the width in feet. To cover 200 square feet with boards 5.5 inches wide, that is 5.5 ÷ 12 = 0.4583 feet wide, and 200 ÷ 0.4583 = 436.4 linear feet. Going the other way, multiply the length in feet by the width in feet.
Flooring, siding, decking, fencing, baseboard, fabric and trim are all sold by one measure or the other. The calculator works in feet and inches or in metres and millimetres, and can tell you how many pieces of a given length make up the total.
Check it by hand: a board 5.5 in wide is 5.5 ÷ 12 = 0.4583 ft wide, and each linear foot of it covers 0.4583 sq ft. So 200 sq ft needs 200 ÷ 0.4583 = 436.36 linear feet. The reverse works the same way: 100 linear feet of a 6 in (0.5 ft) board covers 100 × 0.5 = 50 sq ft.
Linear feet = square feet ÷ width in feet Square feet = linear feet × width in feet Width in feet = width in inches ÷ 12
Worked example
To cover 200 square feet with boards 5.5 inches wide, the run is 200 ÷ (5.5 ÷ 12) = 436.4 linear feet.
In 8 foot boards that is 54.5, so 55 pieces. With 10% extra for cuts it is 480 linear feet and 60 pieces.
Good to know
- Use the exposed width. Tongue and groove boards and lap siding are sold by the nominal width, but they cover less once the overlap is taken off.
- Add an allowance for waste when you buy. Cutting around corners and the ends of rows wastes material, usually 5 to 15%.
- This is a straight conversion for a rectangular area. Shapes with angles or curves are better measured with the square footage calculator first.
Questions people ask
How do I convert square feet to linear feet?
Divide the square feet by the width of the board in feet. For boards 6 inches wide (0.5 feet), 100 square feet is 200 linear feet.
How many linear feet are in a square foot?
It depends on the width. For a 12 inch wide board, one linear foot is one square foot. For a 6 inch board, it takes 2 linear feet to make a square foot, and for a 4 inch board, 3.
How do I convert linear feet to square feet?
Multiply the length in feet by the width in feet. 100 linear feet of a board 6 inches wide is 100 × 0.5 = 50 square feet.
What does lineal foot mean?
Lineal foot and linear foot mean the same thing. It is one foot measured along a length, with no width counted.
How many linear feet of 1x6 do I need for 200 square feet?
A nominal 1x6 board is really about 5.5 in wide, which is 0.4583 ft. Divide 200 sq ft by 0.4583 and you get 436.36 linear feet, before any extra for waste. If you buy 8 ft boards, 436.36 ÷ 8 is 54.5, so plan on 55 boards at least, and more once you add cuts.
Part of the guide: Unit converters: length, weight, area, volume, temperature and more