How to use the 3D tank volume calculator
Choose the shape of your tank, type its inside sizes and the 3D model updates as you type. The tank is drawn to scale, so a taller or wider tank looks different straight away. Drag the model to turn it, and use the buttons to zoom or tilt. Everything runs in your browser, so your sizes are never sent anywhere.
Pick the right shape
Thirteen shapes are covered: vertical and horizontal cylinders, rectangular tanks and cubes, spheres and hemispheres, capsules, cone-bottom tanks, truncated cones, elliptical tanks lying down or upright, and rectangular hoppers. For a tank with dished ends, choose Dished ends and enter the depth of each end (a 2:1 end is a quarter of the diameter); for domed ends, the capsule is the closest match. Measure the inside, because the wall takes up room, and use one unit for every size. You can type metres, centimetres, millimetres, feet or inches and switch at any time.
Find how much liquid is inside
Type the height of the liquid from a dipstick reading, type a fill percentage, or drag the slider. The tool shows the liquid volume, the empty space and the fill percentage in litres, cubic metres, US gallons and UK gallons. In a round tank the volume is not proportional to the height. A horizontal cylinder filled to a quarter of its diameter holds about 20% of its volume, not 25%, so the percentage by height and the percentage by volume can differ.
Estimate the weight
Choose steel, stainless steel, aluminium, plastic, fibreglass or concrete, enter the wall thickness and pick the liquid. The tool multiplies the wall area by the thickness and the density to get the empty weight, then adds the weight of the liquid. Use it to check that a floor, a stand or a trailer can carry the tank. The figure is an estimate, so allow extra for fittings, supports and the lid.
Why use our Tank Volume Calculator?
- Fill and empty time. Enter a pump or tap flow rate to see how long the empty space takes to fill and how long the liquid inside takes to drain.
- See the tank as you type. The 3D tank fills, resizes and shows its dimension lines with your numbers, so a wrong measurement is easy to spot.
- Litres, gallons and cubic metres. Every result is shown in the units people actually use, including US and UK gallons, with a dipstick for partly filled tanks.
- English, Hindi and Urdu. All labels and messages are translated, and the Urdu page flips fully to right-to-left.
- Private and ad-free. Everything is calculated in your browser. Nothing is uploaded and there are no ads on the tool.
How it works
A tank holds its base area times its height. For a vertical cylinder the base is a circle, so the volume is pi times the radius squared times the height. For a box it is length times width times height. A horizontal cylinder is a circle on its side, so the circle area is multiplied by the length.
Gallons follow the legal definitions. The US gallon is exactly 231 cubic inches, which is 3.785411784 litres (NIST Handbook 44), and the imperial gallon is exactly 4.54609 litres.
To find how much liquid is in a tank that is part-full, the calculator uses the liquid height. In a vertical tank or a box, the volume is the base area times that height. In a horizontal cylinder, the liquid surface cuts the circle, and the filled area is a circle segment whose area comes from the radius and the depth. The calculator uses that formula to give the volume.
Measure the inside of the tank if you can, since the walls take up some space. All sizes use the same unit. The result is shown in litres, US gallons, imperial gallons, cubic metres and cubic feet, so you can use the one your supplier works in.
Check it by hand: for an upright round tank 1 m across and 2 m tall, the area of the circle is 3.1416 × 0.5 × 0.5 = 0.7854 m². Multiply by the height of 2 m to get 1.5708 m³, and by 1,000 to get 1,571 litres. This is the same answer the calculator shows when you open the page.
Vertical cylinder: V = π × (diameter ÷ 2)² × height Horizontal cylinder: V = π × (diameter ÷ 2)² × length Box: V = length × width × height Part-filled horizontal: V = length × (r² × arccos((r − h) ÷ r) − (r − h) × √(2rh − h²)) 1 m³ = 1,000 litres = 264.17 US gallons
Worked example
A vertical tank 1 metre across and 2 metres high has a base area of π × 0.5² = 0.7854 square metres.
The volume is 0.7854 × 2 = 1.5708 cubic metres, which is 1,571 litres or about 415 US gallons.
Good to know
- The quick calculator handles three shapes. The 3D studio covers thirteen, including cone bottoms and capsules. Dished ends are covered by their own shape, which assumes semi-elliptical ends. Other domed ends are not counted exactly, and the capsule or sphere is the closest match.
- Use the inside dimensions. The wall thickness of steel or plastic tanks can be a centimetre or more.
- For a part-filled horizontal tank, the liquid height must be measured from the lowest point on the inside, and cannot be more than the diameter.
Questions people ask
How long does it take to fill or empty a tank?
Divide the litres by the flow rate. A 1,000 litre tank filled at 20 litres per minute takes 50 minutes, and at 1 cubic metre per hour it takes 1 hour. The studio does this for you from the tank shape and the liquid level.
How do I calculate the volume of a cylindrical water tank?
Square the radius (half the diameter), multiply by pi (3.1416) and then by the height. A tank 1 metre across and 2 metres high holds about 1,571 litres.
How many litres are in a cubic metre?
1,000 litres. A cubic metre is also about 264 US gallons, or 220 imperial gallons.
How do I find the volume in a half-full horizontal tank?
Enter the liquid height, measured from the bottom inside the tank. At exactly half the diameter, the volume is half the full capacity. At other heights the answer is not simply proportional, because the tank is round.
What is the difference between US and imperial gallons?
A US gallon is 3.785 litres, and an imperial gallon, used in the UK, is 4.546 litres. Check which one your supplier or tank label uses.
How many litres is a tank 1 metre wide and 2 metres tall?
A round upright tank with a 1 metre diameter and a height of 2 metres holds about 1,571 litres, which is 415 US gallons or 1.571 cubic metres.
How many gallons is 1,000 litres?
1,000 litres is about 264.2 US gallons or 220 imperial gallons.
Part of the guide: Heating, cooling and water calculators: BTU, pipes, tanks, pumps and pools