How to Calculate Tank Volume: Complete Guide with 3D Visualization (2026)

Formulas, a dipstick method for part-filled tanks and a weight estimate, with a free 3D calculator to check your numbers.

Last updated: 11 November 2026

Knowing exactly how much a tank holds is not something to leave to a guess. A builder needs it to size a water tank for a house. A farmer needs it to mix the right amount of fertilizer or spray for a field. A fuel supplier needs it to know what a tanker can carry, and a factory needs it to dose chemicals safely. Get the number wrong and you pay for it: a tank that is too small runs dry, one that is too large wastes money and space, and an overfilled one spills.

This guide shows how tank volume is worked out for the most common shapes, how to find the liquid in a part-filled tank, and how to estimate the weight of the tank itself. You can follow every step in our free 3D Tank Volume Calculator, which draws your tank to scale and runs in your browser.

Try it now: Tank Volume

Common tank shapes and their formulas

Every tank volume comes from one idea: the area of the base multiplied by the height or length the tank extends. Measure the inside of the tank, because the wall takes up room, and use the same unit for every size. In the formulas below, r is the radius (half the diameter), h is the height, L is the length, W is the width and H is the height of a box.

Vertical cylinder:    V = π × r² × h
Horizontal cylinder:  V = π × r² × L
Rectangular tank:     V = L × W × H
Capsule:              V = π × r² × (L − 2r) + (4/3) × π × r³
Sphere:               V = (4/3) × π × r³
  • Vertical cylinder. A round tank standing upright. For a tank 1 m across and 2 m tall, the radius is 0.5 m, so V = 3.1416 × 0.5 × 0.5 × 2 = 1.571 m³. That is 1,571 litres, or about 415 US gallons.
  • Horizontal cylinder. The same round tank lying on its side, like a tanker or a buried fuel tank. Use the length where the height was. A tank 1 m across and 2 m long also holds 1,571 litres when full.
  • Rectangular tank. A box. A tank 2 m long, 1 m wide and 1.5 m high holds 2 × 1 × 1.5 = 3 m³, which is 3,000 litres or about 793 US gallons.
  • Capsule. A cylinder with half a ball on each end, common for plastic and fuel tanks. A capsule 1 m across and 3 m long has a straight part of 2 m. V = 3.1416 × 0.25 × 2 + (4/3) × 3.1416 × 0.125 = 1.571 + 0.524 = 2.094 m³, or 2,094 litres.

Other shapes follow the same logic: a sphere, a hemisphere, a cylinder with a cone at the bottom, a truncated cone, an elliptical tank and a rectangular hopper. The calculator covers all twelve, so you do not have to work them out by hand.

To change units, remember that 1 cubic metre is 1,000 litres, one US gallon is 3.785 litres and one UK (imperial) gallon is 4.546 litres. Always check which gallon your supplier means.

What is partial fill, and how does the dipstick calculator help?

Most tanks are not full. Partial fill means finding the volume of liquid at a given height, which is what a dipstick or a level gauge tells you. For a vertical cylinder or a box it is easy: the base area times the liquid height. A tank 1 m across with liquid standing 1.2 m high holds 3.1416 × 0.25 × 1.2 = 0.942 m³, which is 942 litres.

A horizontal cylinder is different. The liquid surface cuts across a circle, so the volume does not grow in step with the height. A horizontal tank filled to a quarter of its diameter holds about 20% of its volume, not 25%. The exact formula uses an arccosine and is easy to get wrong by hand:

V = L × (r² × arccos((r − h) ÷ r) − (r − h) × √(2rh − h²))

The same effect shows up in spheres, capsules and cone-bottom tanks. The dipstick part of our calculator handles every shape. Type the liquid height from your dipstick reading, or type a fill percentage, or drag the slider. It shows the liquid volume, the empty space and the fill percentage in litres, cubic metres, US gallons and UK gallons, and the 3D model shows the liquid level as you change it.

Measure the liquid height from the lowest point inside the tank, and make sure the tank stands level. A tilted tank gives a wrong reading.

Why the weight of the tank matters: empty and full

Volume tells you what the tank holds. Weight tells you whether the floor, the stand, the roof or the truck can carry it. Water weighs about 1 kg per litre, so a 1,000 litre tank carries a tonne of water before you add the weight of the tank. Diesel is lighter, at about 0.83 kg per litre, while milk and honey are heavier.

The empty weight depends on the wall. A simple estimate is wall area times thickness times the density of the material. Steel is about 7,850 kg/m³, stainless steel 8,000, aluminium 2,700, HDPE plastic 950, fibreglass 1,800 and concrete 2,400. For example, a closed steel tank 1 m across and 2 m tall has a wall area of 7.85 m². With a 5 mm wall it weighs about 308 kg empty. Filled with water it holds about 1,568 kg of water, so the full weight is about 1,876 kg.

  • Structural safety. A tank on a roof, a mezzanine or a stand must be checked against the load the structure can take. Use the full weight, not the empty weight.
  • Transport. A tanker or trailer has a legal weight limit, and a full tank can go over it.
  • Handling. Cranes, forklifts and straps must be rated for the weight of the tank when it is full.

The weight in our calculator is an estimate. Allow extra for fittings, ribs, legs, welds and the lid, and ask an engineer about any critical load.

Tips for accurate results

  • Measure the inside sizes, not the outside.
  • Use one unit for every size. The calculator lets you pick metres, centimetres, millimetres, feet or inches.
  • The usable volume is often less than the full volume, because tanks are not filled to the brim. Leave some space at the top.
  • For a tank with domed ends, use the capsule or the sphere as the closest match, and check with a gauge if the figure matters.
  • Look at the 3D model. If the picture does not look like your tank, one of the sizes is probably wrong.

Try the free 3D Tank Volume Calculator

Enter your tank sizes, set the liquid level and see the volume, the empty space and the weight in seconds. It is free, works on your phone and keeps your numbers in your browser.

Open the 3D Tank Volume Calculator

Common questions

How do I calculate the volume of a cylindrical tank?

Square the radius (half the diameter), multiply by pi (3.1416) and then by the height, or by the length if the tank is lying down. A tank 1 metre across and 2 metres high holds about 1,571 litres.

How do I find how much liquid is in a half-full tank?

In an upright cylinder or a box, half the height is half the volume. In a horizontal cylinder the volume is half only at exactly half the diameter. At other heights it is not proportional, so use the dipstick calculator.

How many litres are in a US gallon and a UK gallon?

A US gallon is 3.785 litres and a UK (imperial) gallon is 4.546 litres. A cubic metre, or 1,000 litres, is about 264.2 US gallons or 220 UK gallons.

How much does a full water tank weigh?

About 1 kg for every litre of water, plus the weight of the tank. A 1,000 litre tank holds about a tonne of water.

Should I measure the inside or the outside of the tank?

Measure the inside, because that is the space the liquid fills. The wall of a steel, plastic or concrete tank takes up room that the outside sizes would count by mistake.

Can I calculate a tank with rounded ends?

Yes. A capsule is a cylinder with half a ball on each end, so it is the closest match for most tanks with rounded ends. A sphere and a hemisphere are also available.

Tools used in this guide