How it works
The water you need to store is the number of people times the water each uses per day, times the days you want to cover. Add any extra reserve, such as water for a garden or fire fighting. This is the water you can actually draw.
A tank is never usable all the way. There is an air gap at the top for the float valve and overflow, and some water sits below the outlet. The calculator treats 10% of the tank as unusable by default, so the tank volume is the water to store divided by 0.9. You can change the percentage.
The answer is then rounded up to the next stock size from the list 500, 750, 1,000, 1,500, 2,000, 3,000, 5,000 and 10,000 litres. If you need more than 10,000 litres, it shows how many 10,000 litre tanks that takes. Gallons are shown next to litres throughout.
The water use levels are typical planning values: 80 litres a person a day for careful use, 150 for a normal home and 200 or more for a home with a garden or high use. Your own water bills are always a better guide.
Once you have the volume, use the Tank Volume Calculator to turn it into a diameter and height for a cylinder or the sides of a rectangular tank.
Check it by hand: 4 people at 150 L a day for 2 days need 4 × 150 × 2 = 1,200 L. If 10% of the tank cannot be used, the tank must be 1,200 ÷ (1 − 0.10) = 1,333 L. The next standard size is 1,500 L. That size gives 1,500 × 0.9 ÷ 600 = 2.25 days of supply.
Water to store = people × litres per person per day × days + reserve Tank volume = water to store ÷ (1 − unusable share) 1 US gallon = 3.785411784 litres Default use: 150 L per person per day, a common planning value (guides range from about 135 to 150 L for a normal home)
Worked example
Four people at 150 litres each per day, stored for 2 days: 4 × 150 × 2 = 1,200 litres of water to draw. With 10% unusable, the tank must be 1,200 ÷ 0.9 = 1,333 litres (352 US gallons).
The next standard size is 1,500 litres (396 US gallons). That tank gives 1,350 litres of usable water, which is 2.3 days of supply for this household.
Good to know
- Daily use differs a lot between homes, climates and habits. The three levels are planning values, not measured data for your area.
- Local rules decide some sizes. For example, a building code, a fire authority or a water company can ask for a minimum storage volume. Check with them for commercial buildings, hospitals and fire systems.
- Stock sizes vary by maker and country. The list used here is common, but your supplier may sell 600, 1,200 or 2,500 litre tanks too.
- A tank on a roof or tower must also be supported. A full 1,000 litre tank weighs about a tonne, so the structure must be checked by someone qualified.
- The tool does not cover pressure or pump sizing. See the Hazen-Williams Calculator for pipe friction.
Questions people ask
How do I calculate the size of a water tank?
Multiply the people by the litres each uses per day and by the days of storage, add any reserve, and divide by 0.9 to allow 10% unusable space. For 4 people, 150 litres and 2 days, that is about 1,333 litres.
How much water does one person use per day?
A common planning figure is 150 litres (about 40 US gallons) a day for a normal home, with 80 litres for careful use and 200 litres or more with a garden. The real figure depends on the climate and the fittings. Your water bill shows it.
What size overhead tank do I need for a house?
For a family of 5 using 150 litres each, one day of storage is 750 litres, so a 1,000 litre tank covers it with room to spare. For two days you need 1,500 litres of water, which is 1,667 litres of tank with 10% unusable, so a 2,000 litre tank. The calculator gives the exact number for your case.
How many gallons is a 1,000 litre tank?
About 264 US gallons, or 220 imperial gallons. The calculator shows US gallons next to every litre figure.
Why add 10% for dead space?
The tank cannot be filled to the brim, and the outlet is a little above the bottom, so some of the volume is never drawn. A tank sized to the exact water need would run short.
How do I find the dimensions of the tank?
Take the volume from this calculator and enter it in the Tank Volume Calculator with a diameter or width to get the height. It handles round and rectangular tanks.
What tank do 5 people need for 3 days at 150 L each a day?
5 × 150 × 3 = 2,250 L, and with 10% unusable, 2,250 ÷ 0.9 = 2,500 L.
Part of the guide: Heating, cooling and water calculators: BTU, pipes, tanks, pumps and pools