Tile Calculator

How many tiles, and how many boxes, to buy for a floor, wall or backsplash.

ft

ft

For a wall, use its height here.

sq ft

Windows, doors, outlets, a range hood or cabinets that will not be tiled. Leave empty for none.

in

in

in

1/8 inch is 0.125. Use 0 for rectified tiles laid tight.

%

Allow 10% for straight lay and 15% or more for diagonal, herringbone or very small tiles.

Printed on the box. Leave empty to skip the box count.

Per box if you entered tiles per box, otherwise per tile.

Labour quoted per square foot of tiled area. Leave empty to skip.

Tiles to buy

130

tiles of 12 × 12 in

Area to tile
120 sq ft
Tiles without extra
118
Extra for waste (10%)
12
Area the tiles will cover
130 sq ft

To tile 120 sq ft with 12 × 12 in tiles and 10% extra, buy 130 tiles.

Add this calculator to your website

Free to use on any site or blog. Paste this code where you want the calculator to appear. It stays up to date, needs no account, and keeps your visitors' numbers in their own browser.

Preview

How it works

Each tile covers its own size plus half of the grout joint on every side. So the area one tile uses is (tile length + joint) times (tile width + joint). Dividing the area to tile by that number gives how many tiles fit.

Tiles get cut at the edges, chipped and sometimes laid wrong, so the calculator adds an allowance and rounds up to whole tiles. The default is 10%, which suits a straight layout. A diagonal pattern, herringbone, or a room with many corners wastes more, so raise it to 15% or higher.

For a backsplash or a wall with openings, enter the length and height of the wall, then the area to subtract for windows, outlets and anything else you will not tile. The area to tile is the whole area minus that, and the tile count follows from it.

If you enter the number of tiles in a box, the calculator also gives the number of boxes. Boxes are usually sold whole, so you may end up with a few spare tiles. Keep them for repairs, because tiles from a later batch can differ in shade.

Check it by hand: a 12 by 10 ft floor is 120 sq ft. With a 1/8 in joint a 12 in tile really takes up 12.125 × 12.125 = 147.02 sq in, which is 1.021 sq ft. So 120 ÷ 1.021 = 117.5, which rounds up to 118 tiles. Add 10% for cuts and breakage, about 12 tiles, and you buy 130.

Area to tile = length × width − area to subtract
Tiles = area to tile ÷ ((tile length + joint) × (tile width + joint))
To buy = tiles × (1 + extra ÷ 100), rounded up

Worked example

A floor 12 feet by 10 feet is 120 square feet. A 12 inch tile with a 1/8 inch joint covers 12.125 × 12.125 = 147 square inches, or 1.021 square feet.

The floor takes 120 ÷ 1.021 = 118 tiles. With 10% extra (129.3 rounded up) you should buy 130 tiles.

Good to know

  • The calculator uses the area method, which is accurate for a plain rectangle. Pillars, alcoves and stairs need their own calculation, then add them up.
  • Subtracting an opening assumes the cut around it wastes about the same as the rest, so keep the waste allowance. Tiles around outlets and windows are cut, so do not lower it much.
  • Tiles that are sold by the square foot or square metre do not need the tile size. Use the square footage calculator and add your waste allowance.

Questions people ask

How many tiles do I need for a 12x10 room?

A 12 by 10 foot room is 120 square feet. With 12 inch tiles and a 1/8 inch joint you need 118 tiles, or 130 once you add 10% for cuts and breakage.

How much extra tile should I buy?

About 10% for a simple straight layout and 15% or more for diagonal patterns, herringbone, small mosaic or a room with lots of corners. Buy a little more if the tile is hard to match later.

How do I calculate square feet for a backsplash?

Multiply the length of the backsplash by its height in feet. A backsplash 10 feet long and 18 inches (1.5 feet) high is 15 square feet. Then subtract any window or other opening, and enter the tile size to get the tile count.

How do I measure for a backsplash?

Measure the length of the wall along the counter, and the height from the counter to the underside of the cabinets or to the ceiling, whichever you will tile. Measure windows and the space behind a range hood that you will leave bare, and enter their total area to subtract.

Do I count the grout joint?

Yes, it is included. Wider joints mean fewer tiles. Enter 0 if you will lay rectified tiles with almost no joint.

How many tiles are in a square foot?

A 12 by 12 inch tile covers 1 square foot, so you need 1 tile per square foot. An 8 by 8 inch tile covers 0.44 square feet, so you need 2.25 tiles per square foot.

How many 12 by 24 inch tiles do I need for a 12 by 10 foot floor?

The area is still 120 sq ft. A 24 by 12 in tile with a 1/8 in joint takes up 24.125 × 12.125 in, so you need 60 tiles, and with 10% extra the calculator says 65.

Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more

Formulas and text last checked on 6 October 2026. Everything is calculated in your browser, so nothing you enter is sent or stored. Spotted a mistake? Tell us and we will fix it.