Carpet Calculator

How much carpet to buy for rooms and stairs from a 12 or 15 ft roll, with seams, pattern repeat, padding, tack strip and an installed cost range.

Room shape

Type feet, or feet and inches, such as 12.5 or 12' 6" or 12 1/2.

Ask the shop for the repeat. Each drop rounds up to a whole repeat.

Leave empty to use the planning range. Prices are 2026 planning averages, not quotes. Local prices may vary 10 to 25%. Padding is my own allowance.

Carpet to buy
22 sq yd198 sq ft, 16.5 ft from the roll
Finished area
180 sq ft20 sq yd
Strips and seams
1 / 0strips 1, seams 0
Actual waste
10%
Padding
22 sq yd
Tack strip
51 ft
Carpet
$594.00 to $990.00
Padding
$88.00 to $176.00
Installation labor
$270.00 to $540.00
Installed cost
$952.00 to $1,706Cost per sq ft $5.29 to $9.48

Both standard rolls buy the same amount here.

The waste factor, not the layout, sets the amount to buy here.

Roll layout

Carpet stripSeamOffcut

Roll layout on a 12 ft roll: 1 strips and 0 seams for 180 sq ft of room, 198 sq ft bought.

Strips of the roll laid across each room. Dashed lines are seams. The light area is offcut.

RollStrips / seamsCarpet to buyWaste
12 ft1 / 022 sq yd10%
15 ft
1 / 022 sq yd10%
Step by step

Worked from your numbers. It changes as you type.

  1. Finished area = 15 × 12 = 180 sq ft.
  2. Roll 12 ft: 1 strip(s) running along the length, drop 15 ft, so 0 seam(s). Layout = 12 × 1 × 15 = 180 sq ft.
  3. Waste 10%: 180 sq ft × 1.10 = 198 sq ft. You buy the larger of the layout and this: 198 sq ft (22 sq yd).
  4. Tack strip = perimeter 54 ft − 1 doorways × 3 ft = 51 ft.
  5. Padding = carpet to buy 198 sq ft × 1.00 = 22 sq yd.
  6. Carpet: 198 sq ft × $3.00 to $5.00 per sq ft = $594.00 to $990.00.
  7. Padding: 22 sq yd × $4.00 to $8.00 per sq yd = $88.00 to $176.00.
  8. Labor: 180 sq ft × $1.50 to $3.00 per sq ft = $270.00 to $540.00.
  9. Installed total: $952.00 to $1,706, which is $5.29 to $9.48 per sq ft.

Carpet waste factor guide

Room or carpetWaste factor
Plain carpet, simple room10%
Irregular room, closets, L-shapes15%
Patterned carpet20% +

The calculator buys the larger of the layout off the roll and the area plus this waste.

Carpet cost breakdown

ItemPlanning range
Carpet, by grade$3 – $5 per sq ft
Padding$4 – $8 per sq yd
Installation labor, by region$1.5 – $3 per sq ft
Old carpet removal$1 – $2 per sq yd
Moving furniture$50 – $150 per room
Transitions$5 – $15 each
Stairs installation$8 – $15 per step

Standard nylon shown for carpet. Region multiplies labor and stairs only. 0.85× – 1.25×

Free API and embed

Send a GET request, no key needed. Please link back to this page.

https://ivorytool.com/api/carpet?length=15&width=12&roll=12&waste=10

Returns carpet, padding, seams, tack strip and cost as JSON. Add steps=13 for stairs.

Embed this calculator with an iframe:

<iframe src="https://ivorytool.com/embed/carpet-calculator" width="100%" height="900" loading="lazy"></iframe>
Add this calculator to your website

Free to use on any site or blog. Paste this code where you want the calculator to appear. It stays up to date, needs no account, and keeps your visitors' numbers in their own browser.

Preview

Why use our Carpet Calculator?

  • Roll width tested for you It compares a 12 ft and a 15 ft roll and shows which buys less carpet and fewer seams.
  • A diagram of the strips See the strips laid across the room, the seams as dashed lines and the offcut.
  • Stairs as well as rooms Treads, risers, nosing, landings, waterfall or Hollywood style, and a runner option.
  • Pattern repeat built in Each drop rounds up to a whole repeat and the extra carpet is shown.
  • US regional pricing Carpet, padding, labor, removal and transitions as a low to high range, moved by region.
  • L-shapes and several rooms Split a room into rectangles, or add rooms that each have their own roll width and waste.
  • Free API and embed A JSON endpoint and an iframe, with no key.
  • English, Hindi and Urdu Every label and step is translated, and the page flips to right to left in Urdu.
  • No ads, no signup Your numbers stay in your browser.

How to use the Carpet Calculator

Pick US or metric units, then Room, Stairs or Several rooms. Type sizes in feet and inches, such as 15, 12.5 or 15' 6". For an L-shaped room choose L-shape or Several rectangles, add each rectangle and enter the length of wall they share, so the tack strip is right.

Choose the roll width: 12 ft is the most common in the US and 15 ft is the other standard. The calculator lays strips along the length and along the width and keeps the layout that buys less. A room wider than the roll needs ⌈width ÷ roll⌉ strips and that many strips minus one seams. The table compares both rolls.

Waste is 10% for plain carpet, 15% for an irregular room and 20% for a pattern. You buy the larger of the layout off the roll and the area plus waste, so the carpet that overhangs at a seam is not counted twice. A pattern repeat in inches rounds every drop up to a whole repeat: a 14 ft drop with an 18 in repeat becomes 15 ft.

Padding matches the carpet you buy, in square yards. Tack strip runs round the walls minus the doorways. Doorways take nothing off the carpet, because the carpet runs through them.

For stairs enter the steps, tread, riser, stair width, nosing and any landings, then pick waterfall or Hollywood, or a runner. Prices are planning ranges and the region moves labor and stair steps. Check by hand: 15 by 12 ft is 180 sq ft, which is 20 sq yd, and with 10% waste you buy 22 sq yd.

Strips = ⌈room width across the roll ÷ roll width⌉
Seams = strips − 1
Drop = room length, rounded up to a whole pattern repeat
Layout = strips × roll width × drop
Carpet to buy = larger of layout and area × (1 + waste)
Tack strip = perimeter − doorway widths
Stairs per step = (tread + riser, plus nosing for Hollywood) × width

Worked example: a 15 by 12 ft room

Area = 15 × 12 = 180 sq ft, or 180 ÷ 9 = 20 sq yd. The room is 12 ft wide, so it fits one 12 ft roll: 1 strip, 0 seams, and the drop is 15 ft.

Layout = 12 × 15 = 180 sq ft. With 10% waste you buy 180 × 1.10 = 198 sq ft, which is 22 sq yd. Padding is 22 sq yd too.

Tack strip = 2 × (15 + 12) − one 3 ft doorway = 51 ft. At $3 to $5 per sq ft for standard nylon, $4 to $8 per sq yd for padding and $1.50 to $3 per sq ft for labor, the installed range is $952 to $1,706.

Good to know

  • Where seams fall is a judgment call. Ask your installer, especially in halls and doorways.
  • Several rectangles are worked out one at a time. Only the wall they share comes off the tack strip, and the diagram stacks them instead of showing their true position.
  • Prices are 2026 planning averages for the US and vary 10 to 25% locally. The padding price is my own allowance. Type your own prices when you have a quote.
  • Stairs use the simple tread, riser and nosing sums. Winders, curved stairs and open risers need a measured template.

Questions people ask

How many square yards of carpet do I need for a 12x15 room?

A 12 by 15 ft room is 180 sq ft, or 20 sq yd. Cut from a 12 ft roll it takes one strip with no seam, and with 10% waste you buy 22 sq yd.

Should I choose a 12 ft or a 15 ft roll?

Whichever buys less carpet and fewer seams. A 15 ft roll covers a room up to 15 ft wide with no seam, so it often wins for wide rooms, but not every style comes in 15 ft. The comparison table tests both.

How much extra carpet do I need for a pattern?

Round every drop up to a whole pattern repeat so the design matches across seams, and use 20% waste or more. Type the repeat in inches and the calculator does the rounding.

How do I measure stairs for carpet?

Measure one tread, one riser and the stair width, add the nosing overhang and count the steps. Measure landings as small rooms. Waterfall carpet drapes over the edge, Hollywood wraps the nosing.

How much does it cost to install carpet?

Planning ranges are $2 to $8 per sq ft for carpet by grade, $1.50 to $3 per sq ft for labor, plus padding. Removal, furniture and transitions are optional extras. Use your own quotes where you have them.

How much padding and tack strip do I need?

Padding equals the carpet you buy, in square yards. Tack strip runs round the walls of the room, minus the doorways.

How Carpet Is Sold

Carpet comes on a roll of fixed width, 12 ft most often in the US and 15 ft for wider rooms. You pay for the rectangle cut from the roll, not for the floor area, so the amount to buy is almost always larger than the room.

Retail prices are per square foot or square yard, and a square yard is 9 sq ft. A room wider than the roll needs a second strip and a seam, and the leftover is waste. Run seams perpendicular to the main entry and under furniture where you can.

A pattern adds more, because each drop is rounded up to the repeat. Patterned carpet usually needs 20% waste or more.

Stairs Carpet Measuring Guide

Measure one tread, the flat part you step on, one riser, the vertical part, and the stair width. Count the steps. The nosing is the lip that overhangs the riser, and it is counted for the Hollywood style. The International Residential Code, published by the ICC, allows a riser up to 7 3/4 in and asks for a tread of at least 10 in, so expect sizes near that.

Waterfall carpet drapes over the edge and down the riser. Hollywood carpet is wrapped around the nosing. Measure each landing as width times depth and add its area.

A runner covers the middle of the stairs and leaves wood at the sides. Its length is the same run, with waste, and its width is the width you choose.

Carpet Cost Breakdown

Installed cost is carpet, padding and labor, plus optional removal and disposal, moving furniture, transitions at doorways and stair installation by the step. The table lists the ranges used.

Region matters. The calculator multiplies labor and stair steps by 0.85 in the Southeast up to 1.25 in the Northeast.

More worked examples

12 by 12 bedroom: 144 sq ft, one strip of a 12 ft roll, and with 10% waste you buy 158.4 sq ft, which is 17.6 sq yd.

15 by 20 living room: 300 sq ft. On a 12 ft roll it takes 2 strips and a seam, 360 sq ft or 40 sq yd. On a 15 ft roll one strip covers it, 300 sq ft, and with 10% waste you buy 330 sq ft, or 36.7 sq yd, with no seam.

Staircase with a landing: 13 steps, 10 in tread, 7.5 in riser, 36 in wide, one 3 by 3 ft landing, waterfall. Treads 32.5 sq ft, risers 24.4 sq ft, landing 9 sq ft, 65.9 sq ft in all. With 10% waste you buy 72.5 sq ft, or 8.1 sq yd.

Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more

Formulas and text last checked on 15 November 2026. Everything is calculated in your browser, so nothing you enter is sent or stored. Spotted a mistake? Tell us and we will fix it.