Wallpaper Calculator

How many rolls of wallpaper to buy in the US, Pakistan or India, counted wall by wall with pattern repeat, half-drop match, spare roll and cost.

Feet, or feet and inches: 12.5 or 12' 6" or 12 1/2.

Total for the ceiling and the skirting, usually 4 in (10 cm).

The label wins. Most US paper is sold as a double roll but priced per single roll.

Pattern match

Printed on the label. Use 0 for plain paper.

Extra buffer (%)

Extra paper for cutting mistakes. The strips already include the repeat, so 0 is usual. Area-method guide for this paper: 20%. One spare roll is wise. Unopened rolls can usually be returned.

Doors save strips only when they are wide. Windows are never taken off.

Prices are 2026 planning ranges from the brief, not quotes. Type your own to replace them.

Rolls to buy
1211 for the strips, 1 spare
Strips needed
3232 counted wall by wall, 0 saved by doors
Cut length of a strip
10 ftwall + trim, matched to the repeat
Strips from one roll
333 ft ÷ 10 ft
Trim, match and offcuts
41%of the paper used
Wall area to cover
364 sq ftopenings 20 sq ft left out
Single rolls (priced per single)
24a double roll counts as two
Paper
$1,015 to $2,909
Installation
$1,092 to $2,912
Total cost
$2,107 to $5,821
Cost per sq ft of wall
$5.79 to $15.99

Dye lot: buy every roll from the same batch number. Colours can differ between print runs.

In the US most paper is sold as a double roll but priced per single roll. Check which one the label means.

Unopened spare rolls can usually be returned after the job.

A large repeat wastes the most paper. Ask the shop for the repeat before you buy.

Wall layout

On the wallTrimOffcut

4 walls, 32 strips of 10 ft each, 12 rolls to buy.

The walls side by side, to scale. Each column is one strip. Lines show the pattern.

Step by step

Worked from your numbers. It changes as you type.

  1. Walls: 12 ft, 12 ft, 12 ft, 12 ft. Strips per wall = width ÷ 20.5 in, rounded up: 8 + 8 + 8 + 8. Total 32 strips.
  2. No door takes off a whole strip, so all 32 strips stay.
  3. Strip length = height 8 ft + trim 4 in = 8.33 ft.
  4. Rounded up to whole repeats of 24 in: 10 ft.
  5. Strips per roll = roll length 33 ft ÷ strip length 10 ft, rounded down = 3.
  6. Rolls = 32 strips ÷ 3 per roll, rounded up = 11.
  7. Spare rolls 1: rolls to buy = 12.
  8. Priced per single roll: 24 single rolls.
  9. Paper: 12 rolls × $84.56 to $242.41 = $1,015 to $2,909.
  10. Installation: 364 sq ft × $3 to $8 = $1,092 to $2,912.
  11. Total: $2,107 to $5,821, which is $5.79 to $15.99 per sq ft of wall.

Pattern repeat explained

MatchStrip lengthTypical waste
Random or plainwall + trim5 to 10%
Straight matchrounded up to whole repeats10 to 20%
Half-dropstraight length + half a repeat20 to 30%

The strip count already includes the repeat. Add a buffer only for cutting mistakes. The percentages are the area-method guide for large and small repeats.

Single roll or double roll

RollSizePaper
US single20.5 in × 16.5 ft28 sq ft
US double20.5 in × 33 ft56 sq ft
US wide double27 in × 27 ft61 sq ft
53 cm roll53 cm × 10 m57 sq ft

US paper is sold as a double roll but priced per single roll. Some shops in Pakistan and India quote about 50 sq ft for a 53 cm roll.

Worked example for each country

United States: 12 × 12 ft room, 8 ft walls, 24 in straight repeat

  1. Walls: 12 ft, 12 ft, 12 ft, 12 ft. Strips per wall = width ÷ 20.5 in, rounded up: 8 + 8 + 8 + 8. Total 32 strips.
  2. No door takes off a whole strip, so all 32 strips stay.
  3. Strip length = height 8 ft + trim 4 in = 8.33 ft.
  4. Rounded up to whole repeats of 24 in: 10 ft.
  5. Strips per roll = roll length 33 ft ÷ strip length 10 ft, rounded down = 3.
  6. Rolls = 32 strips ÷ 3 per roll, rounded up = 11.
  7. Spare rolls 1: rolls to buy = 12.
  8. Priced per single roll: 24 single rolls.

Pakistan: 4 × 3 m room, 2.4 m walls, 64 cm straight repeat

  1. Walls: 4 m, 3 m, 4 m, 3 m. Strips per wall = width ÷ 53 cm, rounded up: 8 + 6 + 8 + 6. Total 28 strips.
  2. No door takes off a whole strip, so all 28 strips stay.
  3. Strip length = height 2.4 m + trim 10 cm = 2.5 m.
  4. Rounded up to whole repeats of 64 cm: 2.56 m.
  5. Strips per roll = roll length 10 m ÷ strip length 2.56 m, rounded down = 3.
  6. Rolls = 28 strips ÷ 3 per roll, rounded up = 10.
  7. Spare rolls 1: rolls to buy = 11.

India: 3.66 m feature wall, 2.74 m high, 61 cm half-drop

  1. Walls: 3.66 m. Strips per wall = width ÷ 53 cm, rounded up: 7. Total 7 strips.
  2. No door takes off a whole strip, so all 7 strips stay.
  3. Strip length = height 2.74 m + trim 10 cm = 2.84 m.
  4. Rounded up to whole repeats of 61 cm: 3.05 m.
  5. The drop adds 0.31 m: 3.36 m.
  6. Strips per roll = roll length 10 m ÷ strip length 3.36 m, rounded down = 2.
  7. Rolls = 7 strips ÷ 2 per roll, rounded up = 4.
  8. Spare rolls 1: rolls to buy = 5.

Dye lot warning

Colours can differ between print runs. Buy every roll from the same batch number, and keep one spare for repairs.

Planning costs by country

CountryPaperInstallation
United States$0.50 to $15 per sq ft of paper, by type$3 to $8 per sq ft of wall
PakistanPKR 2,100 to 6,500 per rollPKR 3,000 to 6,000 per roll
India₹1,800 to 18,000 per roll, by type₹35 to 80 per sq ft

Planning ranges only, not quotes. Prices vary by city and shop.

Free API and embed

Send a GET request, no key needed. Please link back.

https://ivorytool.com/api/wallpaper?market=pk&length=4&width=3&height=2.4&repeat=64&match=straight

The JSON has strips, rolls, waste and a cost range. market is us, pk or in.

Or add the calculator to your site with an iframe from the box under the page.

Add this calculator to your website

Free to use on any site or blog. Paste this code where you want the calculator to appear. It stays up to date, needs no account, and keeps your visitors' numbers in their own browser.

Preview

Why use our Wallpaper Calculator?

  • Three countries, built in The US, Pakistan and India each get their own rolls, units, terms and planning prices, not one set translated.
  • The drop method Strips are counted wall by wall and rounded up, the way paper hangers work, not from the total area.
  • Straight, half-drop and random match Each match changes the strip length, and a custom drop covers third and quarter drops.
  • Dye lot and spare roll A clear dye-lot warning and a spare roll in every result.
  • A to-scale layout See the strips, the trim, the offcuts and the pattern lines on each wall.
  • A PDF report Download the walls, rolls, match and cost to take to the shop.
  • A cost range Paper, installation, wall prep and paste as a range, or with your own prices.
  • Free API and embed A JSON endpoint and an iframe, with no key.
  • English, Hindi and Urdu Every label and step is translated, and the page flips to right to left in Urdu.
  • No ads, no signup Your numbers stay in your browser.

How to use the Wallpaper Calculator

Pick your country first: United States, Pakistan or India. It sets the units, the starting roll and the planning prices. Then choose Whole room for four walls, or Wall by wall to type each wall, for example one feature wall.

Strips are counted wall by wall, because a strip does not turn a corner. Each wall needs its width divided by the roll width, rounded up. A door saves strips only when a whole strip fits inside it, and the short piece over the door still needs paper. Windows are never taken off, because the paper above and below them still needs strips.

Each strip is the wall height plus a trim allowance (4 in or 10 cm), rounded up to a whole pattern repeat for a straight match. A half-drop match adds half a repeat to every strip, and a custom drop adds the share of the repeat you enter.

Strips per roll is the roll length divided by the strip length, rounded down, because strips cannot be joined on the wall. Rolls to buy is the strips divided by strips per roll, rounded up. You can add a buffer for cutting mistakes, and a spare roll, which is one by default.

US paper is sold as a double roll (20.5 in × 33 ft, 56 sq ft) but priced per single roll (28 sq ft), so the US result shows both counts. Pakistan and India use a 53 cm × 10 m roll, about 57 sq ft.

The cost is a planning range for the country, or your own prices if you type them. Download the PDF report to take the numbers to the shop.

Strips per wall = wall width ÷ roll width, rounded up
Strip length = (wall height + trim) rounded up to whole repeats
Half-drop strip length = that + repeat ÷ 2
Strips per roll = roll length ÷ strip length, rounded down
Rolls = strips ÷ strips per roll, rounded up, plus the spare

Worked example

US: a 12 × 12 ft room with 8 ft walls, a 20.5 in × 33 ft double roll and a 24 in straight repeat. Each wall needs 144 ÷ 20.5 = 7.02, so 8 strips, and 32 in all. A strip is 96 in + 4 in = 100 in, rounded up to 5 repeats = 120 in (10 ft). A 33 ft roll gives 3 strips, so 32 ÷ 3 = 10.7, and you need 11 double rolls plus 1 spare, which is 12 (24 single rolls).

Pakistan: a 4 × 3 m room with 2.4 m walls, a 53 cm × 10 m roll and a 64 cm straight repeat. The walls need 8 + 6 + 8 + 6 = 28 strips. A strip is 2.5 m rounded up to 4 repeats = 2.56 m, so a roll gives 3 strips. That is 10 rolls plus 1 spare, which is 11.

Good to know

  • The prices are 2026 planning ranges from the brief, not quotes. They vary by city, shop and paper, so type your own for a real figure.
  • A door saves strips only when a whole strip fits inside it, and windows are never taken off. The result can be a little generous, which is the safe side.
  • Half-drop adds half a repeat to every strip. That is slightly more than the even strips strictly need.
  • Buy every roll from the same dye lot. Colours can differ between print runs, and a spare roll helps with repairs.

Questions people ask

How many rolls of wallpaper do I need for a room?

Choose your country, enter the room size, wall height, roll and pattern repeat. A 12 × 12 ft room with 8 ft walls, US double rolls and a 24 in straight repeat needs 11 double rolls, or 12 with one spare. A 4 × 3 m room with 2.4 m walls and 53 cm rolls needs about 10 to 11.

What is the difference between a single roll and a double roll?

A US single roll is 20.5 in × 16.5 ft, about 28 sq ft. A double roll is 20.5 in × 33 ft, about 56 sq ft. Shops sell double rolls but price them per single roll, so check which one the price means. Many 27 in wide papers use 13.5 ft and 27 ft.

How do I calculate wallpaper with a pattern repeat?

Add the trim to the wall height, then round up to a whole number of repeats. That is the strip length. Divide the roll length by it, rounded down, for strips per roll. The calculator does this and shows each step.

What is a half-drop match and how much extra paper does it need?

In a half-drop match every second strip is shifted down by half a repeat. The calculator adds half a repeat to every strip, which is a little generous but safe. A large half-drop repeat can need 20 to 30% more paper than a plain one.

How much extra wallpaper should I buy?

One spare roll. The strip count already allows for the repeat, so an extra buffer is only for cutting mistakes. Unopened rolls can usually be returned.

What is a dye lot and why does it matter?

The batch number printed on the roll. Colours can differ slightly between print runs, so buy every roll from the same lot, and keep the spare from it too.

How many wallpaper rolls do I need in Pakistan?

A roll is usually 53 cm × 10 m, about 57 sq ft, although some shops quote 50 sq ft. For a 4 × 3 m room with 2.4 m walls and a 64 cm repeat you need about 11 rolls with one spare. Keep up to 20% extra for a large pattern.

How many wallpaper rolls do I need in India?

A roll is usually 53 cm × 10 m. A 3.66 m feature wall, 2.74 m high, with a 61 cm half-drop repeat needs 5 rolls with one spare. Large florals can waste 15 to 20%, so check the repeat first.

Do I subtract doors and windows?

Only a door that is wide enough to hold a whole strip saves one, and the short piece over it still needs paper. Windows are never taken off, because the paper above and below them still needs strips.

How much does wallpaper cost per roll?

Planning ranges: US paper $0.50 to $15 per sq ft, Pakistan PKR 2,100 to 6,500 per roll, India ₹1,800 to 18,000 per roll by type. Installation is about $3 to $8 per sq ft in the US, PKR 3,000 to 6,000 per roll in Pakistan and ₹35 to 80 per sq ft in India. These are not quotes.

Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more

Formulas and text last checked on 21 November 2026. Everything is calculated in your browser, so nothing you enter is sent or stored. Spotted a mistake? Tell us and we will fix it.