Fill in a start time, an end time and the unpaid break in minutes for each day you worked. Leave the start and end blank on a day off. Each day is the end time minus the start time minus the break, and the week is the sum of the days, shown in hours and minutes, in decimal hours and in total minutes.
If a day's end time is earlier than its start time, the shift is taken as running overnight into the next day, so 22:00 to 06:00 is 8 hours. That shift is counted on the day it started. Equal start and end times count as zero hours.
The overtime rule is an example you can change. By default, weekly hours above 40 are overtime and pay 1.5 times the normal rate. Many countries, states and employers use different thresholds, daily limits or multipliers, and no labour law is built into this tool. Type the numbers your employer or contract uses, or switch overtime off.
If you enter an hourly rate, the gross pay estimate is regular hours at the rate plus overtime hours at the rate times the multiplier. It is before tax, insurance and any other deductions.
Check it by hand: a day from 08:00 to 17:00 is 9 hours, and a 45 minute break leaves 8 hours 15 minutes, which is 8.25 hours. Five such days make 5 × 495 = 2,475 minutes, or 41 hours 15 minutes (41.25 decimal hours). With overtime after 40 hours, 40 hours are regular and 1 hour 15 minutes (1.25 hours) is overtime.