Hourly Rate Calculator

Free hourly rate calculator for freelancers, contractors and trades: 2026 US tax, W-2 to 1099, a rate gap check, charts and a free API.

Share of your working hours that you can actually invoice. Most people land between 50% and 70%.
About $600 for one adult and $1,500 for a family.
Retirement saving (SEP-IRA or Solo 401(k))
A cushion above break-even for slow months and growth.
Custom tax rates (optional)
Top marginal rate of the state, used as a flat estimate.
Leave empty to use the 2026 federal brackets. Fill it to replace the bracket maths with one rate.

Rate gap check

Enter what you charge now to see your gap.

Recommended hourly rate
$122Includes a 15% profit margin, rounded up
Break-even hourly rate
$102.92
Gross revenue needed
$118,565
Effective daily rate
$494
Monthly revenue target
$9,880
Billable hours per year
1,1521,920 hours × 60%

Where every billed dollar goes

Where every billed dollar goes50%17%11%16%
  • Take-home $70,000 (50%)
  • Taxes $23,199 (17%)
  • Benefits $15,366 (11%)
  • Overhead $10,000 (7%)
  • Profit $21,979 (16%)

Your rate against your floor

Your rate against your floorBreak-even: $102.92Recommended: $122.00

Of every billed dollar: Take-home 50%, Taxes 17%, Benefits 11%, Overhead 7%, Profit 16%. Break-even $102.92 per hour, recommended $122.00 per hour.

Where the money goes

$Share
Your take-home$70,00059.0%
Federal income tax$7,8666.6%
State income tax (5%)$3,7953.2%
Self-employment tax$11,5389.7%
Health insurance$7,2006.1%
Retirement$8,1666.9%
Business expenses$10,0008.4%
Total revenue needed$118,565100.0%

State tax is an estimate. Consult a CPA for your exact liability. The state rate is the top marginal rate used as a flat rate, so it overstates tax at modest incomes.

Billable hours reality check

1,920 total hours × 60% = 1,152 billable hours a year.

If you bill 80% instead of 60%, your break-even rate drops by 25% to $77.19.

Step by step with your numbers

Each line below uses the numbers you entered.

  1. Billable hours: 48 weeks × 40 hours × 60% = 1,152 hours a year.
  2. Gross-up for income tax: to keep $70,000 after federal tax ($7,866) and state tax ($3,795 at 5%), you need $81,661 before income tax.
  3. Self-employment tax: $81,661 × 15.3% × 92.35% = $11,538.
  4. Business expenses: $10,000.
  5. Health insurance: $600 × 12 = $7,200.
  6. Retirement saving: $8,166.
  7. Revenue needed: $81,661 + $11,538 + $10,000 + $7,200 + $8,166 = $118,565.
  8. Break-even rate: $118,565 ÷ 1,152 hours = $102.92 per hour.
  9. With a 15% profit margin: $102.92 ÷ (1 − 15%) = $121.08, rounded up to $122 per hour.

Typical hourly rates by trade

EmployeeOwner take-homeBilled to customer
General contractor$25 – $40$50 – $75$75 – $150
Electrician$28 – $45$55 – $85$80 – $175
Plumber$27 – $42$50 – $80$75 – $200
HVAC$25 – $40$50 – $80$85 – $175
Roofer$20 – $35$45 – $70$75 – $150
Painter$18 – $30$40 – $60$60 – $120

Free hourly rate API

Call the same maths from your own site or script. No key, and nothing is stored.

https://ivorytool.com/api/hourly-rate?takehome=70000&state=CA&weeks=48&hours=40&billable_pct=60&current=100

Answers in JSON. Fields: takehome, state, filing, mode, weeks, hours, billable_pct, overhead, health, retirement, margin, current, w2salary, tax_rate.

Embed the calculator on your own page:

<iframe src="https://ivorytool.com/embed/hourly-rate-calculator" width="100%" height="900" loading="lazy"></iframe>
Add this calculator to your website

Free to use on any site or blog. Paste this code where you want the calculator to appear. It stays up to date, needs no account, and keeps your visitors' numbers in their own browser.

Preview

Why use our Hourly Rate Calculator?

  • Freelancer and contractor modes Freelancer (1099) and Contractor or Trades modes, with a trade list, working days and billable hours per day.
  • W-2 to 1099 comparison Enter a salary and see the equivalent 1099 revenue and hourly rate, and how many times your W-2 hourly rate you need to charge.
  • A clear rate gap verdict Type what you charge now. A red or green card says if you are undercharging, by how much per hour and per year.
  • Tax and benefits, line by line 2026 federal brackets, self-employment tax, state tax, health insurance, retirement and each business expense with its share.
  • Billable hours reality check Hours times billable share, a warning above 75%, and what your rate would be at 80%.
  • Trade presets and state tax Reference rates for six trades, all 50 states and DC, and a state rate you can override.
  • Charts, three languages, no ads Pie and bar charts that update as you type, English, Hindi and Urdu (right to left), no signup and a free API.

How to use the Hourly Rate Calculator

Pick a mode. Freelancer (1099) is for people who bill by the hour or project. Contractor or Trades adds a trade list, working days and billable hours per day. W-2 to 1099 starts from a salary. Choose single or married filing jointly and your state.

Enter the take-home pay you want after tax, your working weeks and hours per week, and the share of those hours you can bill. Add business expenses, or switch on itemizing to enter software, equipment, accounting, marketing, insurance, vehicle and office costs one by one.

Set health insurance (about $600 a month for one adult, $1,500 for a family), retirement as a percent of income or a dollar amount, and a profit margin from 0 to 30%. Leave the tax boxes empty to use the 2026 brackets, or type your own rates.

Optionally type what you charge now. The gap card shows how far you are from your floor and the fastest fix. Read the cards, the two charts, the line by line breakdown and the step by step working that uses your numbers.

Check it by hand with a fixed 30% income tax rate: $70,000 ÷ (1 − 0.30) = $100,000. Self-employment tax is $100,000 × 15.3% × 92.35% = $14,130. Add $10,000 expenses, $7,200 health and $10,000 retirement for $141,330. Over 1,152 billable hours that is $122.68 an hour.

Billable hours = weeks × hours per week × billable share (trades: working days × billable hours per day)
Gross-up G = take-home ÷ (1 − income tax rate), or solved from the 2026 brackets
Self-employment tax = G × 92.35% × 15.3% (Social Security part capped at $184,500)
Revenue needed = G + self-employment tax + expenses + health × 12 + retirement
Break-even rate = revenue needed ÷ billable hours
Recommended rate = break-even ÷ (1 − profit margin), rounded up
Gap = recommended − current rate; annual gap = gap × billable hours
W-2 to 1099: revenue = salary × 1.30 + expenses; rate = revenue ÷ billable hours; multiple = 1099 rate ÷ (salary ÷ 2,080)

Worked examples

Freelancer with a fixed 30% income tax rate, $70,000 take-home, 48 weeks, 40 hours, 60% billable, $10,000 expenses, $600 a month health, 10% retirement: 1,152 billable hours. Gross-up $100,000. Self-employment tax $14,130. Revenue $141,330. Break-even $122.68, with a 15% margin $144.33, rounded up to $145. If you charge $100 now, the gap is $45 an hour, or $51,840 a year.

Freelancer who wants $60,000 take-home, single, no state tax, $8,000 expenses, same hours and defaults: the 2026 brackets need $65,078 before income tax. Self-employment tax $9,195, health $7,200, retirement $6,508. Revenue $95,981. Break-even $83.32, recommended $99 an hour. At $50 now that is $49 an hour short, or $56,448 a year.

Electrician who wants $80,000 take-home, 220 working days, 6 billable hours a day (1,320 hours), $25,000 overhead, Texas, single: $89,461 before income tax, self-employment tax $12,640. Revenue $143,247. Break-even $108.52, recommended $128 an hour, a $768 day. That sits inside the $80 to $175 range for electricians.

W-2 employee on $80,000 thinking about 1099: the W-2 rate is $80,000 ÷ 2,080 = $38.46. Benefits at 30% are $24,000. Add $10,000 expenses for $114,000 of revenue. Over 1,152 billable hours that is $98.96 an hour, 2.57 times the W-2 rate.

Good to know

  • This is a planning estimate, not tax advice. It uses 2026 federal brackets and standard deduction from the IRS and a flat state rate. It leaves out the qualified business income deduction, credits, other income and the additional Medicare tax. A CPA can give your exact figure.
  • State tax is the top marginal rate used as a flat rate, so it overstates tax at modest incomes. Type your own state rate in the tax box if you know it. Local taxes and city taxes are not included.
  • The 30% benefits load for W-2 jobs is a common rule of thumb. Your employer may pay more or less. Trade reference ranges are national planning figures, and the overhead defaults are my own planning numbers, not survey data.
  • The recommended rate is a floor that covers your goals, not a market price. Check what clients in your field pay, and the rate also assumes the billable share you enter holds all year.

Questions people ask

How do I calculate my hourly rate, and what should I charge as a freelancer?

Work out the pre-tax income you need for your take-home, add self-employment tax, expenses, health insurance and retirement, then divide by the hours you can bill. Add a profit margin on top. The calculator does each step with your numbers.

What is the difference between W-2 and 1099 pay?

A W-2 employer pays half of payroll tax and usually adds benefits such as health cover, retirement matching and paid leave. A 1099 contractor pays all of it and carries their own expenses, so the same lifestyle needs a much higher hourly rate.

How many billable hours should I assume?

Most freelancers and contractors bill 50% to 70% of their working hours. The rest goes on sales, admin, quotes and gaps between jobs. Using 100% makes the rate too low, and the calculator warns above 75%.

How is self-employment tax calculated?

It is 15.3% of 92.35% of your net earnings: 12.4% for Social Security up to a yearly limit and 2.9% for Medicare. Half of it is deductible when working out income tax.

What is a good profit margin for a contractor?

Many small contractors aim for 10% to 20% above break-even. The default here is 15%. The slider goes from 0 to 30% so you can test slow seasons, growth plans and risk.

Does it work for tradespeople like electricians and plumbers?

Yes. Pick Contractor or Trades, choose the trade, and enter working days and billable hours per day. Six trades show a national employee, owner and billed-to-customer range for comparison.

Is the state tax exact?

No. It is an estimate that applies the top marginal rate of your state as a flat rate. That is usually higher than what you really pay. You can override it, and a CPA can give the exact liability.

Is it free, and can I use it on my own site?

Yes. There is no signup, limit or ads. There is a free JSON API and an embed with no key. Please link back to this page when you show results.

Freelance Hourly Rate Formula

Start with the pay you want to keep. Because tax comes out of what you earn, divide the take-home by one minus your income tax rate to find the income you must earn first. Self-employment tax of 15.3% on 92.35% of net earnings sits on top, then business expenses, health insurance and retirement saving. The total is the revenue you need.

Divide that revenue by your billable hours, not your working hours. At 48 weeks of 40 hours with 60% billable, that is 1,152 hours. Then add a profit margin. A 15% margin means dividing the break-even rate by 0.85, not multiplying by 1.15, because the margin is a share of what you charge.

W-2 vs 1099: What's the Real Difference?

On a W-2 job your employer pays half of Social Security and Medicare, often most of your health cover, a retirement match and paid time off. A common rule of thumb values that package at about 30% of salary. As a 1099 contractor you pay the full 15.3% self-employment tax and buy the rest yourself.

That is why an $80,000 salary does not translate to an $80,000 contract. After benefits and overhead the revenue needed is $114,000 in the example above, and with only 1,152 billable hours the hourly rate is about 2.57 times the W-2 hourly rate of $38.46.

Billable Hours Reality Check

It is tempting to divide by 2,080, the hours in a full-time year. That is a trap. Finding clients, writing quotes, invoicing, learning and gaps between jobs are unpaid. Most freelancers and contractors bill 50% to 70% of the hours they work, and a rate built on 2,080 hours will leave you short.

The calculator shows the maths and a warning above 75%. It also shows the what-if: at 60% billable your break-even is $102.92, and at 80% it would be 25% lower, because the same costs are spread over a third more hours. Raising the share you bill is one of the fastest ways to earn more per hour of work.

2026 US Contractor Hourly Rates by Trade

The table below the calculator lists national planning ranges for six trades: what an employee earns per hour, what an owner takes home per hour, and what the business bills the customer. They are rounded figures, so treat them as a sanity check, not a quote. The BLS publishes wage data by occupation if you want to go deeper.

The billed rate is far above the employee wage because it carries vehicles, insurance, tools, licences, marketing, unpaid hours, benefits and tax as well as profit. If your recommended rate lands below the billed range, you may be undercharging. If it lands above, check your overhead and billable hours first.

How to Close the Gap If You're Undercharging

If the gap card is red, you have three levers. Raise the rate, raise the share of hours you bill, or cut costs. The fastest is the rate. The card shows the percentage rise that closes the gap in one step. New clients can usually take it straight away, and existing clients can be moved over a few months.

If a full rise is too much at once, raise the billable share first with batching, retainers or fixed-price packages. Then review overhead line by line in the breakdown. A smaller insurance bill or a cheaper vehicle can matter as much as a few dollars on the rate.

Part of the guide: Pricing, profit and tax calculators: margin, markup, GST, VAT and selling price

Formulas and text last checked on 16 November 2026. Everything is calculated in your browser, so nothing you enter is sent or stored. Spotted a mistake? Tell us and we will fix it.