PSI to Bar Converter

Change a pressure between psi, bar, kPa, MPa, atm, mmHg, inHg, mbar and kgf/cm2.

Bar

2.206322

32 psi = 2.206322 bar

Bar (bar)
2.206322
Kilopascals (kPa)
220.6322
Megapascals (MPa)
0.2206322
Standard atmospheres (atm)
2.177471
Millimetres of mercury (torr) (mmHg)
1,654.878
Inches of mercury (inHg)
65.15265
Millibar or hectopascals (mbar)
2,206.322
Kilogram-force per cm2 (kgf/cm2)
2.249823
Pascals (Pa)
220,632.2

32 psi is 2.206322 bar.

Add this calculator to your website

Free to use on any site or blog. Paste this code where you want the calculator to appear. It stays up to date, needs no account, and keeps your visitors' numbers in their own browser.

Preview

Example pressure values, for reference only

Example pressure values, for reference only
ExamplepsibarkPa
Standard atmosphere (sea level, 1 atm)14.6961.013101.325
Weather map reading, 1013 mbar14.6921.013101.3
Low weather reading, 980 mbar14.2140.9898
Example tyre figure, 32 psi322.206220.632
Example tyre figure, 2.5 bar36.2592.5250
Example tyre figure, 220 kPa31.9082.2220
Example road bicycle tyre, 100 psi1006.895689.476
Example mains water, 3 bar43.5113300
Example mains water, 50 psi503.447344.738
Example pressure washer, 2000 psi2,000137.89513,789.515
Example scuba cylinder, 200 bar2,900.75520020,000

How it works

Each pressure unit is stored as an exact number of pascals. The tool turns your number into pascals and then into the unit you picked, so every pair of units is consistent.

One psi is 6,894.757293168 pascals, which is 0.06894757 bar or 6.894757 kPa. A bar is exactly 100,000 pascals, a kilopascal is 1,000 pascals and a megapascal is 1,000,000. One standard atmosphere is 101,325 pascals, which is 14.69595 psi and 1.01325 bar.

Weather reports use millibars or hectopascals (the same size: 1 mbar = 1 hPa = 100 Pa). Older gauges and medical devices use millimetres of mercury, and some barometers use inches of mercury. The kgf/cm2 unit is still printed on some pumps and gauges, and it is very close to 1 bar: 0.980665 bar.

Gauge pressure (psig, barg) is measured against the air around you and absolute pressure (psia, bara) is measured against vacuum. The difference between them is the local atmosphere, about 14.7 psi at sea level. This tool converts the units only and does not change between gauge and absolute, so type the number exactly as the gauge shows it and read the result in the same sense.

Check it by hand: one psi is 6,894.757 pascals and one bar is 100,000 pascals. 32 psi × 6,894.757 = 220,632 Pa, which is 2.2063 bar or 220.63 kPa. To go back, 1 bar = 14.5038 psi, so 2.5 bar × 14.5038 = 36.26 psi.

Result = pressure × (Pa per from-unit) ÷ (Pa per to-unit)
1 psi = 6894.757293168 Pa    1 bar = 100000 Pa    1 atm = 101325 Pa
1 mmHg = 101325/760 Pa    1 inHg = 3386.389 Pa    1 kgf/cm2 = 98066.5 Pa
Sources: NIST SP 811 and NIST Handbook 44

Worked example

32 psi × 6894.757293168 ÷ 100000 = 2.206322 bar, or 220.6322 kPa.

2.5 bar ÷ 0.06894757 = 36.25943 psi.

1 atm = 101325 ÷ 6894.757293168 = 14.69595 psi.

Good to know

  • The table of example values is there to show how the units compare. It is not a recommendation for any tyre, tank, pipe or appliance. Check the vehicle placard or the maker's instructions for the right pressure, and never go past a pressure rating marked on the equipment.
  • The tool does not convert between gauge and absolute pressure, and it does not correct for temperature or altitude.
  • Negative values are allowed because gauges can read below atmospheric pressure, but the result is only a unit change of the number you typed.

Questions people ask

How do I convert psi to bar?

Multiply psi by 0.0689476. 30 psi is 2.068 bar. To go back, multiply bar by 14.5038.

How many psi is 1 bar?

One bar is 14.50377 psi.

How do I convert kPa to psi?

Divide kilopascals by 6.894757, or multiply by 0.145038. 200 kPa is 29.01 psi.

How many kPa are in a bar?

One bar is exactly 100 kPa.

Is bar the same as atmosphere?

Nearly, but not exactly. One standard atmosphere is 1.01325 bar, about 1.3 percent more than 1 bar.

How many psi is 2.5 bar?

36.26 psi. Multiply bar by 14.5038.

Part of the guide: Unit converters: length, weight, area, volume, temperature and more, Heating, cooling and water calculators: BTU, pipes, tanks, pumps and pools

Formulas and text last checked on 14 October 2026. Everything is calculated in your browser, so nothing you enter is sent or stored. Spotted a mistake? Tell us and we will fix it.