Why use this calculator?
- Three markets, equal treatment US state flat rates, Pakistan NEPRA slabs and India state slabs, each with its own rules and currency. You pick the market, and the language is a separate choice.
- Real slab bills Pakistan and India bills are walked slab by slab, with protected and unprotected rates, GST, fixed charges and duty. The slab table shows every step.
- The true cost of one appliance An AC lands on top of your other units, so it pays the top slabs. The tool prices it as the bill with it minus the bill without it.
- Whole home audit Add up to 12 appliances, see each one’s share of the units in a pie chart and the three biggest consumers.
- Bill estimator and savings Turn a number of units into a bill, or compare an old appliance with a new one and see the payback in months.
- Editable wattage list Each market starts from typical watts, duty cycle and hours. Type your own watts over any of them.
- CO₂, PDF and API Emissions at 0.4, 0.5 or 0.7 kg per kWh, a one page PDF report, a free JSON API and an embed.
How to use the Appliance Electricity Cost Calculator
Pick a market and a mode. One appliance prices a single device, Whole home adds up a list, Bill estimator turns units into a bill, and Savings compares an old appliance with a new one.
For each appliance enter the quantity, watts, hours a day, days a month and the duty cycle. Duty cycle is the share of the running time at full power: about 33 percent for a fridge and 70 percent for an inverter AC. Standby watts count for the hours it is off.
Choose your tariff. In the US pick a state and add sales tax or a fixed charge if you want. In Pakistan choose protected or unprotected and GST. In India pick a state and add duty. A rate you type replaces the table.
Read the cost per hour, day, month and year, the share of your units, the slab table and the charts. Open the step by step working to check each line, and save the PDF if you need a record.
Daily kWh = watts × quantity × hours × duty cycle ÷ 1,000 + standby watts × quantity × hours off ÷ 1,000 Monthly kWh = daily kWh × days of use Slab bill = sum of (units in each slab × the rate of that slab) Bill = (slab bill + fixed charge) × (1 + tax or GST) Appliance cost = bill with the appliance − bill without it CO₂ = kWh × 0.4 (US), 0.5 (Pakistan) or 0.7 (India) kg
Worked examples
US: a central AC of 3,500 W for 8 hours, 30 days, is 840 kWh. In California at 31.91 cents per kWh that is $268.04 a month and $3,216.53 a year, about 336 kg of CO₂ a month.
Pakistan: a 1.5-ton inverter AC of 1,200 W for 8 hours is 288 kWh. With 62 other units the home uses 350 units. On unprotected slabs the energy charge is Rs 10,344.50, and Rs 12,103.07 with 17% GST. The AC adds Rs 10,475.27 to the bill, which is 82.3% of the units.
India: a 1.5-ton AC of 1,800 W for 8 hours is 432 kWh. On Delhi slabs that is 200 × ₹3 + 200 × ₹5 + 32 × ₹6.50 = ₹1,808, and ₹1,898.40 with 5% electricity duty.
Good to know
- Wattage and duty cycle are typical planning values. Age, size, settings and weather change the real draw. A plug-in watt meter gives the true figure, and the nameplate gives the maximum.
- Tariffs change. US rates are state averages from the EIA for November 2025. Pakistan and India slabs are residential energy charges before fuel price adjustments and surcharges. Match them to your own bill.
- Pakistan uses the national NEPRA slabs, with no DISCO selector. India covers eight states and an average. For any other state or utility type your own rate.
- Time of use pricing, net metering, solar and seasonal tiers are not modelled. The CO₂ factors are planning figures, not a carbon audit.
Questions people ask
How much does my AC cost to run?
Multiply watts by hours and divide by 1,000 to get kWh, then price the kWh. A 3,500 W central AC for 8 hours is 28 kWh a day. At 18 cents that is about $5 a day. In Pakistan and India the AC is priced at the top slabs of your bill, so use the Whole home or One appliance mode with your other units.
How are Pakistan electricity slabs calculated?
Each slab charges only the units inside it. For 350 unprotected units: 100 at Rs 22.44, 100 at Rs 28.91, 100 at Rs 33.10 and 50 at Rs 37.99, then 17% GST. The tool shows each slab so you can match your bill.
What is a protected consumer in Pakistan?
A household that stays at 200 units or less in the month. It pays the two lower protected slabs. Go above 200 units and every unit is billed at the unprotected slabs, which is why a hot month can double a bill.
How do Indian slab tariffs work?
Each state commission sets its own slabs. Delhi, for example, charges ₹3 for the first 200 units, ₹5 up to 400, ₹6.50 up to 800 and more above that. Fixed charges, fuel adjustment and duty are added. Pick your state and compare with your bill.
How do I find the electricity rate for my US state?
Choose your state in the tool. It uses the EIA residential average in cents per kWh. Your own utility rate is on the bill, and you can type it in the rate field to replace the state average.
What is duty cycle?
The share of the running time that an appliance really draws full power. A fridge compressor runs about a third of the time, and an inverter AC averages about 70 percent. Use 100 for lights, fans and anything that runs flat out.
How is the cost of one appliance worked out?
The tool prices your whole home with the appliance and again without it, and takes the difference. That counts slabs, fixed charges and tax correctly, so a high slab appliance shows its true cost.
Is there a free API?
Yes. Call /api/appliance with market, state, kwh or appliances (watts:hours:quantity:duty) and it returns monthly kWh, the slab breakdown and the total bill as JSON. No key is needed. An embed version of the tool is also available.
Part of the guide: Electrical, power and solar calculators: amps, wire size, generators and batteries