Electrical, power and solar calculators: amps, wire size, generators and batteries
Convert watts, amps, volts and kVA, size wire, generators, UPS and batteries, plan solar, and find what appliances cost to run.
Electrical planning comes down to a few relationships between volts, amps and watts, and then a few safety margins on top. The tools below do the arithmetic and show their working, so you can check it against a nameplate or a quote.
They are for planning and understanding the numbers. Wiring, generators and battery systems can cause fires and injuries when done wrong, so have the final design checked by a licensed electrician and follow your local code.
Which tool do I need?
Start from your question.
- How many amps does a 2000 W appliance draw?Watts to Amps Calculator. DC, single-phase and three-phase, with power factor.
- What is the difference between kVA and kW?kVA to kW Calculator. Converts using the power factor, with kVAR and line current.
- How many amps does a motor draw?Motor Current Calculator. Full-load amps from hp or kW, with a starting current multiple.
- How do I convert hp to kW?HP to kW Calculator. Mechanical, metric and electrical horsepower, plus the kVA a motor needs.
- What wire size do I need?Wire Size Calculator. In mm² and AWG, with the voltage drop.
- How big a generator do I need?Generator Size Calculator. kW and kVA with motor starting load.
- What size UPS or inverter do I need?UPS and Inverter Size Calculator. VA and watts, and the current from the battery.
- How long will my battery last?Battery Backup Time Calculator. Backup time, or the Ah needed for a runtime.
- How many solar panels and batteries do I need?Solar Panel Calculator. Panels from your monthly use. The battery tool sizes the storage.
- What does it cost to run an appliance?Appliance Electricity Cost Calculator. Up to 8 appliances at your own price per kWh.
- What will my monthly bill be?Electricity Bill Calculator. From the slab rates on your own bill.
- What is the total load of my home?Electrical Load Calculator. Connected and demand load, kVA and current.
Volts, amps and watts
Power in watts equals volts times amps for DC. For single-phase AC, multiply by the power factor too: watts = volts × amps × power factor. For three-phase AC it is watts = √3 × line volts × amps × power factor. Rearranged, a 2,300 W appliance at 230 V and a power factor of 1 draws 10 A.
Power factor describes how much of the current does useful work. Heaters are close to 1, while motors and many electronics are lower. kVA is the apparent power the wiring and the supply must carry, and kW is the real power that does the work, so kW = kVA × power factor. Generators and transformers are rated in kVA for this reason.
Wire size, voltage drop and safety margins
A wire must carry the current without overheating (its ampacity) and without losing too much voltage over its length. Long runs need thicker wire even at modest current. The wire size tool shows both the size and the voltage drop in mm² and AWG. Ampacity depends on insulation, temperature and how cables are bundled, so tables in your local code decide the final choice.
Protect every circuit with a correctly rated breaker or fuse that is sized for the wire, not only for the load.
Generators, UPS and inverters
Add up the running watts of everything that must work together, then allow for motors. Motors such as pumps, compressors and air conditioners draw several times their running current for a moment when they start, and the generator has to ride that out. The generator tool adds this starting load and can derate for altitude. A UPS or inverter is sized in VA or watts in the same way, with some spare capacity so it does not run at its limit.
Batteries and backup time
Battery energy in watt-hours is volts times amp-hours, for example 12 V × 100 Ah = 1,200 Wh. Backup time is usable energy divided by the load, and usable energy is less than the label because you should not drain a battery fully and the inverter loses some energy as heat. How much you can use depends on the battery type, so check the maker's datasheet. The battery tool lets you enter these assumptions.
Solar and running costs
Solar output depends on panel power, how many hours of strong sun a day your location gets, and system losses. Work from your real monthly use in kWh from a bill. An appliance's energy is watts × hours ÷ 1,000 in kWh, and cost is that times your own price per kWh. No prices or tariffs are built in, so the results use what you pay.
Convert and measure
- Watts to Amps CalculatorSolve for watts, amps or volts from the other two, for DC, single-phase or three-phase AC with power factor, with a quick table for 1000 W.
- kVA to kW CalculatorkVA to kW or kW to kVA from the power factor, with kVAR, the phase angle and the line current in amps.
- HP to kW CalculatorConvert hp to kW or kW to hp in either direction for mechanical, metric and electrical horsepower, and find the kVA a motor needs.
- Motor Current CalculatorEstimate motor full-load amps from hp or kW, voltage, phase, efficiency and power factor, with a typical starting current multiple.
- Wire Size CalculatorThe wire or cable size for a load, in square millimetres and AWG, with the voltage drop, plus an AWG to mm² converter.
- Electrical Load CalculatorThe connected and demand load of a home or small building from a list of appliances, with kVA, current, and daily and monthly kWh.
Backup power
- Generator Size CalculatorThe generator size in kW and kVA for what must run together, with motor starting load, altitude derate and an optional fuel estimate.
- UPS and Inverter Size CalculatorThe UPS or inverter size in VA and watts for your load, the nearest standard rating, and the current it draws from the battery.
- Battery Backup Time CalculatorThe backup time of a battery or battery bank for a load in watts, the battery size in Ah for a runtime you want, and an Ah to Wh converter.
Solar
Bills and running cost
- Electricity Bill CalculatorThe running cost of an appliance, a monthly bill from the slab rates on your own bill, and a watts and hours to kWh (units) converter.
- Appliance Electricity Cost CalculatorPick the US, Pakistan or India, add your appliances and see kWh, cost per hour, day, month and year, the slab by slab bill, a pie chart and the savings from a new appliance.
Terms explained
- Volt (V)
- The electrical pressure. Mains is commonly 230 V or 120 V.
- Amp (A)
- The current flowing.
- Watt (W) / kW
- The rate of using power. 1 kW is 1,000 W.
- kWh / unit
- The energy of 1 kW running for 1 hour. The unit on an electricity bill.
- kVA
- Apparent power: volts times amps, before the power factor.
- Power factor
- The share of apparent power that does useful work, from 0 to 1.
- Single-phase / three-phase
- The type of AC supply. Homes are usually single-phase and industry three-phase.
- Ampacity
- The current a wire can carry safely.
- Voltage drop
- Voltage lost along a wire, which grows with length and current.
- Ah / Wh
- Amp-hours and watt-hours: battery capacity.
- UPS / inverter
- Equipment that keeps power on during an outage, or changes DC to AC.
Common questions
How do I convert watts to amps?
Divide watts by volts, and by the power factor too for AC. 2,300 W at 230 V and power factor 1 is 10 A.
What is the difference between kW and kVA?
kW is real power doing work, kVA is the total apparent power. kW equals kVA times the power factor.
How do I choose the right wire size?
Find the current, choose a wire with enough ampacity for it, and check the voltage drop over the length. Then confirm with your local electrical code.
How big a generator do I need?
Add up the running watts of what must run together and allow for motor starting load, then choose a generator above that total. The tool gives kW and kVA.
How long will a battery run my load?
Divide the usable watt-hours of the battery by the load in watts. A 12 V 100 Ah battery holds 1,200 Wh, but only part of that is usable.
How many solar panels do I need?
Start from your monthly kWh, divide by the days and the sun hours for your place, and allow for losses. The solar panel calculator does this and shows the energy an array produces.
How do I find what an appliance costs to run?
Multiply its watts by the hours used, divide by 1,000 to get kWh, and multiply by your price per kWh.
Are these safe for final wiring design?
They are for planning. A licensed electrician must confirm the design against your local code.