Why use this calculator?
- Three markets, each in its own units The US works in board feet and dollars, Pakistan and India in CFT with Lac and Crore. You pick the market, and the language is a separate choice.
- Waste and cost built in Waste chips for 10, 15 and 20 percent, a price that fills from the species and stays editable, optional labour, and a low to high range from the market spread.
- Local woods with local names Seven or more species per market, such as Diyar, Shisham and Kail in Pakistan, or teak and Meranti in India. Edit the density, or add your own wood.
- Log scaling Doyle, Scribner and International ¼ inch side by side, with a note on where each is used, so you see how far the rules differ.
- Reverse and multi-size Type the volume you need and get the pieces to order, or tally up to 12 sizes line by line with a total and a share of each.
- Nominal to actual See how much less wood a 2×4 holds than the size it is priced at, drawn to scale.
- Cut list, PDF and API A to-scale cut list on 8, 10 or 12 ft stock with the offcuts marked, a one page PDF, a free JSON API and an embed.
How to use the Board Foot Calculator
Pick a market and a mode. Volume prices a list of identical pieces, Log scaling estimates the lumber in a log, Reverse turns a wanted volume into pieces, Multi-size tallies different sizes, and Nominal to actual shows the real wood in a size.
Enter thickness, width and length, the number of pieces and the waste. A board foot is 144 cubic inches, so the volume of one piece is thickness in inches times width in inches times length in feet, divided by 12. CFT divides by 144 instead, and 1 CFT is 12 board feet.
Choose the wood. The price fills from the middle of that wood’s market range and you can type your own. The tool also shows the low and high total from the range, optional labour, and the cost per board foot and per CFT.
Check the cut list. Pieces are cut from the stock length you choose, longest first, and each offcut is marked. Use it to see how many boards to buy, and how much of each ends up as waste.
Open the step by step working to check every line against your own sums, copy the result, or save the PDF report.
Board feet = thickness (in) × width (in) × length (ft) ÷ 12 CFT = thickness (in) × width (in) × length (ft) ÷ 144, so 1 CFT = 12 BF Total with waste = volume × (1 + waste ÷ 100) Doyle = (D − 4)² × L ÷ 16 Scribner = (0.79 D² − 2 D − 4) × L ÷ 16 Weight = volume in m³ × density
Worked examples
US: 10 pieces of 2×6×10 ft pine is 100 BF. With 15% waste that is 115 BF, and at $1.00 a BF it costs $115.00.
Pakistan: the same 10 pieces is 8.33 CFT. With 15% waste that is 9.58 CFT, and Kail at Rs 5,000 a CFT comes to Rs 47,916.67.
India: 10 pieces of 2×6×10 ft Pine is 8.33 CFT. With 10% waste that is 9.17 CFT, and at ₹950 a CFT it costs ₹8,708.33.
Good to know
- Prices are market ranges for planning, not quotes. Grade, thickness, region and the dealer move them a lot, so type your own price. Pakistan and India ranges are indicative dealer figures, not an official index.
- Log rules are estimates of lumber from a log, and they disagree. Use the rule your buyer or mill uses. The International ¼ inch rule is the closest to a real yield.
- US lumber is priced on nominal sizes but the real piece is smaller. In Pakistan and India timber is usually sold by the sawn size, so enter that size directly.
- Weight uses air-dry density. Green or kiln-dried wood, and individual logs, differ from the typical figure.
Questions people ask
How do you calculate board feet?
Multiply thickness in inches by width in inches by length in feet and divide by 12. A 2×6 that is 10 feet long is 2 × 6 × 10 ÷ 12 = 10 board feet.
How many board feet are in a CFT?
12. One cubic foot is 1,728 cubic inches and a board foot is 144 cubic inches. Multiply CFT by 12 for board feet, and divide board feet by 12 for CFT.
How do I work out the CFT of timber in Pakistan or India?
Multiply thickness in inches by width in inches by length in feet and divide by 144. A 2×6 that is 10 feet long is 0.833 CFT. Multiply by the pieces, add waste, then multiply by the rate per CFT.
How much waste should I add?
About 10 to 15 percent for framing, around 20 percent for finish work or boards with defects. Pakistan dealers often assume 10 to 20 percent. The tool shows the cut list so you can see the real offcuts.
What is the difference between nominal and actual lumber size?
A 2×4 is sold as 2 by 4 but measures 1.5 by 3.5 inches after planing. The price follows the nominal size, so the real wood is about a third less. Pakistan and India usually sell by the sawn size.
Which log rule should I use: Doyle, Scribner or International?
Use the one your buyer uses. Doyle is common in the eastern and southern US and under-counts small logs. Scribner is common in the west. International ¼ inch is closest to what a mill really cuts.
How do I find the weight of lumber?
Convert the volume to cubic metres, 1 board foot is 0.00236 m³, then multiply by the density in kg/m³. Pine is about 510 and oak about 720. The tool does this when you choose a species.
Is there a free API?
Yes. Call /api/lumber with market, t, w, l, qty, waste, species and price, and it returns board feet, CFT, weight and cost as JSON. No key is needed, and an embed version of the tool is available.
Part of the guide: Building material calculators: concrete, blocks, bricks, flooring and more, Roof, stair, deck and structure calculators