How it works
Enter two points, (x₁, y₁) and (x₂, y₂). The slope is how much the line rises for each step across: the change in y divided by the change in x. A positive slope goes up to the right, a negative slope goes down, and a slope of 0 is a flat line. If both x values are the same the line is vertical and the slope is undefined.
The tool also gives the straight-line distance between the points (the distance formula, which is the Pythagorean theorem), the midpoint (the average of the coordinates), the angle the line makes with the x-axis, and the equation of the line in slope-intercept form, y = mx + b.
The percent grade is the slope as a percentage, used for roads, ramps and roofs. A slope of 0.08 is an 8% grade.
Check it by hand: for the points (1, 2) and (4, 8), the rise is 8 − 2 = 6 and the run is 4 − 1 = 3, so the slope is 6 ÷ 3 = 2. The distance is √(3² + 6²) = √45 = 6.708. The midpoint is ((1 + 4) ÷ 2, (2 + 8) ÷ 2) = (2.5, 5). The angle is arctan(2) = 63.43°, and b = 2 − 2 × 1 = 0, so the line is y = 2x.
Slope m = (y₂ − y₁) ÷ (x₂ − x₁) Distance = √((x₂ − x₁)² + (y₂ − y₁)²) Midpoint = ((x₁ + x₂) ÷ 2, (y₁ + y₂) ÷ 2) Line: y = mx + b, with b = y₁ − m × x₁
Worked example
Points (1, 2) and (4, 8). Rise = 8 − 2 = 6 and run = 4 − 1 = 3, so the slope is 6 ÷ 3 = 2. The line is y = 2x + 0, since b = 2 − 2 × 1 = 0.
The distance is √(3² + 6²) = √45 = 6.7082. The midpoint is (2.5, 5). The angle with the x-axis is atan(2) = 63.4349°, and the perpendicular slope is −0.5.
Good to know
- Works with two points. It does not fit a line through many points (regression).
- The angle is measured from the x-axis, between −90° and 90°. A vertical line is shown as 90°.
- Results are rounded to 6 decimal places for display.
Questions people ask
How do I find the slope between two points?
Divide the change in y by the change in x: m = (y₂ − y₁) ÷ (x₂ − x₁). For (1, 2) and (4, 8), m = 6 ÷ 3 = 2.
What is the distance formula?
Distance = √((x₂ − x₁)² + (y₂ − y₁)²). It is the Pythagorean theorem applied to the change in x and the change in y.
How do I find the midpoint of two points?
Average the x values and average the y values. The midpoint of (1, 2) and (4, 8) is (2.5, 5).
What is the slope of a vertical line?
It is undefined, because the run is 0 and you cannot divide by 0. A horizontal line has a slope of 0.
How do I turn a slope into a percent grade?
Multiply the slope by 100. A slope of 0.08 is an 8% grade, which rises 8 units for every 100 units across.
What is the slope of the line through (0, 0) and (4, 2)?
The rise is 2 and the run is 4, so the slope is 2 ÷ 4 = 0.5, which is a 50% grade.
Part of the guide: Math and study calculators: percentages, fractions, GPA and everyday sums