Why use our Arc Length Calculator?
- Six modes in one place Circle arc, calculus y = f(x), parametric, polar, 3D curves and the chord and height solver. Most calculators only do the first.
- A diagram you can drag The figure redraws as you type. In circle mode, drag either end of the arc around the circle and the angle, arc length and areas follow.
- US engineering presets One tap fills example values for a guardrail curve, a suspension bridge cable, a pipe bend or a roadway curve, in feet or inches.
- English, Hindi and Urdu Every label, error and step is translated, and the page flips to right to left when Urdu is selected.
- Shows its working The step by step section lists each formula with your numbers, and the Simpson's rule setup for curves, so you can check it or copy it into homework.
- No ads, no signup, no limits Nothing to install and nothing to pay. It runs in your browser, so your numbers stay on your device.
How to use the Arc Length Calculator
Pick a mode at the top. Circle arc is the default. Choose your length unit (inches, feet, yards, miles, meters, centimeters or millimeters) and your angle unit (degrees, radians or gradians). Everything updates the moment you type, so there is no Calculate button.
Circle arc: fill in any two of the five values radius, central angle, arc length, chord and height. The tool solves the other three, and also gives the sector area, the segment area and the full circumference. The two fields you typed last are the ones it uses, and the solved fields are marked. You can also drag an end of the arc on the diagram to change the angle.
Calculus, parametric, polar and 3D: type the formulas and the interval. You can use x or t, numbers, + − * / ^, brackets, pi, e and the functions sin, cos, tan, exp, ln, sqrt and abs. The tool finds the derivatives exactly, builds the integral and evaluates it with Simpson's rule using 1,000 slices. Polar limits are in radians, and you can type pi, for example 2*pi.
Chord and height: enter the straight distance between the ends of an arch or curve and how far the arc rises above it. The tool returns r = (4h² + c²) ÷ (8h), then the central angle and the arc length. This is the usual way to get a radius from a measured arch, a road curve or a curved panel.
The preset buttons fill in US customary example values and explain the setting. Copy result puts a one line summary on your clipboard and Reset returns to the starting example. Angle units follow NIST Guide SP 811 and ISO 80000-3, where the radian is the SI unit of plane angle.
Circle arc: s = r × θ (θ in radians) Degrees to radians: θ = degrees × π ÷ 180 Chord: c = 2r × sin(θ ÷ 2) Sagitta (height): h = r × (1 − cos(θ ÷ 2)) Sector area: A = ½ × r² × θ Segment area: ½ × r² × (θ − sin θ) Radius from chord and height: r = (4h² + c²) ÷ (8h) Curve y = f(x): L = ∫ from a to b of √(1 + [f′(x)]²) dx Parametric: L = ∫ from t₁ to t₂ of √((dx/dt)² + (dy/dt)²) dt Polar: L = ∫ from α to β of √(r² + (dr/dθ)²) dθ 3D: L = ∫ from t₁ to t₂ of √((dx/dt)² + (dy/dt)² + (dz/dt)²) dt
Worked example: a 45° arc on a 15 in radius
Step 1. Convert degrees to radians: 45° × π/180 = π/4 = 0.785398 rad.
Step 2. Apply the formula: s = r × θ = 15 × 0.785398 = 11.781 in.
Step 3. Sector area: A = ½ × r² × θ = ½ × 225 × 0.785398 = 88.357 in². The chord is 2 × 15 × sin(22.5°) = 11.481 in, the segment area is 8.808 in² and the full circumference is 94.248 in.
Good to know
- In circle mode the central angle must be below a full turn: 360°, 2π radians or 400 gradians. For more than one turn, add 2πr for each full circle yourself.
- Curves use Simpson's rule with a fixed n = 1000. For smooth curves that is very accurate, and the page shows an error estimate. Where a curve has a vertical tangent or blows up at an end point, the value is only approximate and the tool says so. Writing the curve in parametric form usually fixes it.
- For curves, x, y and z are taken in the length unit you chose, so the answer is in that unit. Polar limits are always in radians.
- The presets use example values, not design values. Real guardrail, road, cable and piping design follows the AASHTO Green Book, FHWA guidance, your state DOT standards and the pipe maker's bend data.
Questions people ask
What is the formula for arc length?
For a circle, arc length s = r × θ with the angle θ in radians. With degrees, s = 2πr × (degrees ÷ 360). For a curve y = f(x), the length is the integral of √(1 + [f′(x)]²) from a to b.
How do I find the arc length from the chord and the height?
First find the radius with r = (4h² + c²) ÷ (8h). Then the central angle is θ = 2 × asin(c ÷ 2r) and the arc length is r × θ. For a chord of 100 ft and a height of 10 ft, r = 130 ft, θ = 45.24° and the arc is 102.65 ft.
How accurate is Simpson's rule with 1,000 slices?
For smooth curves the error is tiny, often smaller than the last digit shown. The tool shows an estimated error with every result. Near a vertical tangent or a point where the function is not defined, the estimate gets large and the tool warns you.
Can I type polar limits in degrees?
No. Polar limits are read in radians, which is how the formula is written. You can type pi, so 2*pi is a full turn and pi/2 is 90°.
What happens if I only know the radius and the chord?
Two arcs fit a radius and a chord, a short one and a long one. The tool shows the short one, under half a circle, and tells you so.
Does it work in metric units?
Yes. The length selector offers inches, feet, yards, miles, meters, centimeters and millimeters. Changing it converts the numbers in the circle fields. The page starts in inches and degrees for US users.
Can it find the length of a catenary or a parabolic cable?
Yes, in calculus mode. Type 0.00025*x^2 for a parabola or a*cosh(x/a) − a for a catenary, with the interval across the span. The cable preset shows a parabola over a 1,600 ft span.
Degrees vs Radians: What's the Difference?
Degrees cut a full turn into 360 equal parts. Radians measure an angle by the arc it cuts off: one radian is the angle at which the arc is exactly as long as the radius. A full turn is 2π radians, about 6.2832, so 1 rad = 57.2958°. Gradians cut a full turn into 400 parts, so a right angle is 100 grad.
The simple formula s = r × θ only works when θ is in radians, because radians are defined by that very ratio. With degrees you have to scale: s = πrθ ÷ 180. The calculator converts for you and shows the conversion line under the unit selectors.
US classrooms usually teach degrees first and switch to radians in trigonometry and calculus, which is why the tool starts in degrees and lets you switch with one selector.
Real-World Applications of Arc Length
Guardrails and roads: a guardrail or a lane edge on a curve follows an arc, so its length is the curve radius times the deflection angle in radians. Horizontal curve length is L = R × Δ, and the chord and height solver recovers a radius from a measured chord and offset.
Bridges and cables: a suspension cable under an even load hangs close to a parabola, and one under its own weight forms a catenary. The cable is always longer than the span between the towers, and the calculus mode gives that length. For a catenary y = a·cosh(x/a), the length from −L to L is 2a·sinh(L/a).
Pipe and tube bending: the pipe along the centerline of a bend has length radius × bend angle, which sets the cut length. A 12 in bend radius through 90° uses 18.85 in of pipe.
Gears and wheels: the circular pitch of a gear is the arc length between neighboring teeth on the pitch circle, πd ÷ N. A wheel of radius r that turns through an angle θ rolls a distance r × θ.
Navigation and maps: distance along the Earth's surface on a great circle is the Earth's radius, about 3,959 miles, times the angle in radians. One degree of latitude is about 69 miles, and a nautical mile was originally one minute of arc.
More worked examples for each mode
Calculus mode: the length of y = x² from x = 0 to x = 2 ft. Here f′(x) = 2x, so L = ∫ from 0 to 2 of √(1 + 4x²) dx. Simpson's rule with n = 1000 gives 4.6468 ft.
Parametric mode: an ellipse x = 3cos t, y = 2sin t for t from 0 to 2π, in feet. The integrand is √(9sin²t + 4cos²t), and the length around the ellipse is 15.8654 ft.
Polar mode: the cardioid r = 1 + cos θ for θ from 0 to 2π, in feet. The integrand is √(r² + (dr/dθ)²), and the full length is 8 ft.
3D mode: a helix x = cos t, y = sin t, z = t for t from 0 to 2π, in feet. The speed is constant at √2, so the length is 2π√2 = 8.8858 ft.
Chord and height mode: an arch with a chord of 100 ft and a height of 10 ft. The radius is (4 × 100 + 100²) ÷ (8 × 10) = 130 ft, the central angle is 45.24° (0.7896 rad) and the arc length is 130 × 0.7896 = 102.646 ft.
Suspension cable preset: the parabola y = 0.00025x² across x = −800 to 800 ft has a sag of 160 ft at the towers and a cable length of 1,641.70 ft, about 2.6% longer than the 1,600 ft span.
Part of the guide: Math and study calculators: percentages, fractions, GPA and everyday sums