Quick reference: inches to centimetres
| Inches | Centimetres |
|---|---|
| 0.125 | 0.3175 |
| 0.25 | 0.635 |
| 0.5 | 1.27 |
| 0.75 | 1.905 |
| 1 | 2.54 |
| 2 | 5.08 |
| 3 | 7.62 |
| 4 | 10.16 |
| 5 | 12.7 |
| 6 | 15.24 |
| 8 | 20.32 |
| 10 | 25.4 |
| 12 | 30.48 |
| 24 | 60.96 |
| 36 | 91.44 |
| 48 | 121.92 |
Convert inches to centimetres or centimetres to inches, and find the nearest fraction of an inch for any cm value.
| Inches | Centimetres |
|---|---|
| 0.125 | 0.3175 |
| 0.25 | 0.635 |
| 0.5 | 1.27 |
| 0.75 | 1.905 |
| 1 | 2.54 |
| 2 | 5.08 |
| 3 | 7.62 |
| 4 | 10.16 |
| 5 | 12.7 |
| 6 | 15.24 |
| 8 | 20.32 |
| 10 | 25.4 |
| 12 | 30.48 |
| 24 | 60.96 |
| 36 | 91.44 |
| 48 | 121.92 |
| Fraction | Inches | Millimetres |
|---|---|---|
| 1/16 | 0.0625 | 1.5875 |
| 1/8 | 0.125 | 3.175 |
| 3/16 | 0.1875 | 4.7625 |
| 1/4 | 0.25 | 6.35 |
| 5/16 | 0.3125 | 7.9375 |
| 3/8 | 0.375 | 9.525 |
| 7/16 | 0.4375 | 11.1125 |
| 1/2 | 0.5 | 12.7 |
| 9/16 | 0.5625 | 14.2875 |
| 5/8 | 0.625 | 15.875 |
| 11/16 | 0.6875 | 17.4625 |
| 3/4 | 0.75 | 19.05 |
| 13/16 | 0.8125 | 20.6375 |
| 7/8 | 0.875 | 22.225 |
| 15/16 | 0.9375 | 23.8125 |
| 1 | 1 | 25.4 |
The inch is defined as exactly 25.4 millimetres, which is exactly 2.54 centimetres. That definition has been fixed since the international yard and pound agreement of 1959 and is listed in NIST Special Publication 811. So there is no rounding in the factor itself: inches to cm is a multiplication by 2.54, and cm to inches is a division by 2.54.
The first tab converts in either direction. Pick the unit you have in From and the unit you want in To, and change the two selects around to swap them. Millimetres, centimetres, metres and feet are listed beside the answer, and the precision select lets you fix the number of decimals instead of the automatic seven digits.
The second tab is for the tape measure. Tape measures and rulers in inches are marked in fractions, not decimals, so a result such as 3.937 in is hard to use. This tab rounds a centimetre length to the nearest 1/8, 1/16, 1/32 or 1/64 inch, reduces the fraction, and shows how far the rounded mark is from the true length in millimetres.
Check it by hand: one inch is exactly 2.54 cm, so multiply inches by 2.54. For the other direction, 10 cm ÷ 2.54 = 3.937 in. To the nearest 1/16, 0.937 × 16 = 14.99, so 15/16, giving 3 15/16 in = 3.9375 in. The rounding error is 0.0005 in, which is 0.013 mm.
cm = inches × 2.54 inches = cm ÷ 2.54 mm = inches × 25.4 Source: 1 in = 25.4 mm exactly (international yard and pound agreement 1959; NIST SP 811)
10 inches × 2.54 = 25.4 cm, which is 254 mm.
The other way round, 10 cm ÷ 2.54 = 3.937008 inches. To the nearest 1/16 inch that reads 3 15/16 in, which is 3.9375 in. The rounded mark is 0.0125 mm longer than 10 cm, far below what a ruler can show.
One inch is exactly 2.54 centimetres, or 25.4 millimetres. That is a definition, not a rounded value.
Divide the centimetres by 2.54. For example, 30 cm ÷ 2.54 = 11.81 inches. You can also multiply by 0.3937008.
Convert to inches, keep the whole number, and round the decimal part to the nearest 1/16 (or 1/32, 1/64). The second tab does this and reduces the fraction, so 8/16 becomes 1/2.
A sixteenth of an inch is 1.5875 mm. A quarter inch is 6.35 mm and a half inch is 12.7 mm.
A4 is 210 by 297 mm, which is 8.268 by 11.693 inches. US Letter is 8.5 by 11 inches, or 21.59 by 27.94 cm.
25.4 cm. Ten inches times 2.54.
Part of the guide: Unit converters: length, weight, area, volume, temperature and more