Water Pump Size Calculator

Pump size

The most water you need at once, for example all taps and the garden together.

m

Vertical height from the water level (the pumping level in a well, after drawdown) to the highest outlet.

bar

For a booster or a pressure tank. 0 if the water simply flows out.

m

mm

The inside diameter, which is smaller than the pipe size on the label.

%

Added to the straight pipe loss. 10 to 30% is a typical allowance for a few bends and valves.

%

Small household pumps are often 30 to 50%, good centrifugal pumps 60 to 80% (typical). The pump curve shows the real value at your duty point.

%

Used for the electrical input. Typical 75 to 92%.

Pump shaft power needed, estimate

0.8411 kW (1.128 hp)

Total head 28.3 m (92.85 ft) at 100 L/min

Static lift
25 m (82.02 ft)
Head for outlet pressure
0 m (0 ft)
Friction loss
3.302 m (10.83 ft)
Total dynamic head
28.3 m (92.85 ft)
Total head as pressure
2.775 bar, 40.25 psi
Flow
100 L/min, 6 m³/h, 26.42 gpm
Water speed in the pipe
1.326 m/s
Hydraulic power (water)
0.4626 kW
Pump shaft power at 55% efficiency
0.8411 kW, 1.128 hp
Electrical input at 85% motor efficiency
0.9895 kW
Next common motor size, typical
1.5 hp (1.119 kW)
Note
Estimate only. It does not replace the pump curve: the supplier or installer picks the pump from the duty point (flow and head) on the curve.

Lifting 100 L/min against a total head of 28.3 m (92.85 ft) needs about 0.8411 kW at the pump shaft with a 55% efficient pump. Estimate only: the pump curve decides.

Pressure and head

Head of water

28.12 m (92.27 ft)

Fresh water, 1 bar = 10.197 m = 33.46 ft, 1 psi = 2.307 ft

Head in metres of water
28.12 m
Head in feet of water
92.27 ft
Pressure in psi
40 psi
Pressure in bar
2.758 bar
Pressure in kPa
275.8 kPa

40 psi of water pressure equals 28.12 m (92.27 ft) of head.

Water Pump Size Calculator by Ivorytool, free tools that run in your browser.