Rebar Calculator

Units
Slabs 3/4 to 2 in, footings 3 in (ACI 318). The drawing decides.
Splice allowance on straight bars. 10% is a common estimate.
Cutting offcuts and mistakes. 10% is common.
Per lb. Empty uses the middle of the range.
Steel to order
477 lbWith 10% lap and 10% waste · 0.238 t
Stock bars to buy
36Bars of 20 ft
Total length
713.9 ftCut pieces: 30
Estimated cost
$358Range $286 to $715
Per sq ft
$0.89

Estimate only. The structural drawing decides sizes, spacing, laps and bends.

Plan view, to scale

20 ft20 ft#4 18 in o.c.#4 18 in o.c.Cover 2 in

Main bars (mark A)Distribution bars (mark B)

20 by 20 ft. 15 main bars of #4 every 18 in, 15 distribution bars every 18 in, cover 2 in.

  • Material $286 – $715 · $358
  • Estimated cost $286 – $715 · $358

$0.75/lb · About $1,200 to $1,800 per ton delivered and fabricated, up to $1.50 per lb in small lots. Placing and tying labour is about $500 to $800 per ton. Prices vary by region.

Bar bending schedule

MarkShapeSizeCut lengthQtyWeight
A00#419.67 ft15197 lb
B00#419.67 ft15197 lb
Total (no lap, no waste)394 lb
With lap allowance434 lb
Order weight with waste477 lb

Lap and development length · #4

LengthDistanceIn bar diameters
Lap in tension24.67 in49.3d
Lap in compression15 in30d
Development length18.97 in37.9d
Estimating lap used20 in40d

ACI 318-19 simplified: Grade 60, f′c 4,000 psi, bottom bars, uncoated. Class B lap = 1.3 × development length.

Step by step working

Your numbers worked through, in the same order the calculator uses.

  1. Main bars (along the length): ⌈(240 in − 2 × 2 in) ÷ 18 in⌉ + 1 = 15 bars, each 19.67 ft long.
  2. Distribution bars: ⌈(240 in − 2 × 2 in) ÷ 18 in⌉ + 1 = 15 bars, each 19.67 ft long.
  3. Total length = 15 × 19.67 ft + 15 × 19.67 ft = 590 ft.
  4. Add lap 10%: 590 ft × 1.1 = 649 ft.
  5. Add waste 10%: 649 ft × 1.1 = 713.9 ft.
  6. Weight = 713.9 ft × 0.668 lb per ft = 477 lb (0.238 t).
  7. Stock bars = ⌈713.9 ft ÷ 20 ft⌉ = 36.
  8. Cost = 477 lb × $0.75/lb = $358.

Rebar Calculator by Ivorytool, free tools that run in your browser.