Asphalt Calculator

Layers

Density 145 lb/ft³ (2,323 kg/m³)

Each layer can have its own thickness and mix, for example a 4 in base course and a 3 in surface. The tons are added up.

Typical densities. Mix designs vary, so ask your plant for its figure. Plants and labs measure it with tests such as ASTM D2726. Loose HMA is the HMA density divided by the compaction factor.

Loose mix takes up about 1.27 times its rolled volume. It sets the loose volume to haul.
A tandem dump truck carries about 20 to 25 tons.

Off by default. Asphalt weighs the same loose or rolled, so only its volume changes. Turn this on only to match a calculator that multiplies the tons.

These are planning figures, not quotes. Hot mix prices follow crude oil and change from week to week, so replace the price with a quote from your plant.

To order (tons)
19.031,000 ft² · 9.26 yd³
Truckloads
1last load 19.03 tons
Area
1,000 ft²
Compacted volume
250 ft³9.26 yd³
Compacted weight
18.13 tons
Loose volume to haul
11.76 yd³× 1.27
Covered by one ton
55 ft²
Hot mix cost
$2,28419.03 × $120
Cost per full truckload
$2,64022 tons

Small jobs may round up to the plant minimum and to a full truckload.

Cost breakdown

Hot mix

Coverage of one ton

Square feet covered by one ton at each thickness (inches) for the first layer. The dark bar is your thickness.

Step-by-step working

Worked out with your numbers. It updates as you type.

  1. Area = 50 × 20 ft = 1,000 ft².
  2. Volume = 1,000 ft² × (3 in ÷ 12) = 250 ft³.
  3. Volume in cubic yards = 250 ÷ 27 = 9.26 yd³.
  4. Compacted weight = 250 ft³ × 145 lb/ft³ ÷ 2,000 = 18.13 tons.
  5. Loose volume to haul = 9.26 yd³ × 1.27 = 11.76 yd³. The weight stays 18.13 tons, because loose and rolled mix weigh the same.
  6. Waste (5%): 18.13 × 1.05 = 19.03 tons.
  7. Truckloads (22 tons per truck): ⌈19.03 ÷ 22⌉ = 1.
  8. Hot mix cost (at $120 per ton): 19.03 × $120 = $2,283.75.

Asphalt Calculator by Ivorytool, free tools that run in your browser.