Baluster Spacing Calculator

Market

What do you need?

You can type 96, 3 15/16, 8 ft, 8' 3", 2.4 m or 2400 mm.

IRC R312.1.3: a 4 in sphere must not pass. The stair option allows 4-3/8 in on open stair sides, a commonly quoted figure, so confirm it with your inspector. IBC guards are 42 in or more.

Guard height in this code: 36 in

Waste · Fasteners and cost
Balusters per section
17fewest that pass: 17
Clear gap
3.92 in3-15/16 in · PASS
On-center spacing
5.42 in5-7/16 in
First centre from the left post
4.67 in4-11/16 in
Largest gap allowed
4 in4 in
To order
18with 5% waste
Needed in place
17

This layout meets IRC R312.1.3 with a clear gap of 3.92 in.

Drawn to scale

Posts are grey, balusters blue. Urdu pages keep this drawing left to right so that "from the left post" always matches the picture.

Estimates for planning. Codes differ by place and edition, so check yours before you build.

Markout list
Step by step working

The working for the figures above, with your own numbers.

  1. Clear run L = 96 in.
  2. Fewest balusters: n = ⌈(L − g) ÷ (w + g)⌉ = ⌈(96 in − 4 in) ÷ (1.5 in + 4 in)⌉ = ⌈16.73⌉ = 17.
  3. Clear gap = (L − n × w) ÷ (n + 1) = (96 in − 17 × 1.5 in) ÷ 18 = 3.92 in.
  4. On-center = gap + w = 3.92 in + 1.5 in = 5.42 in.
  5. First centre from the left post = gap + w ÷ 2 = 3.92 in + 0.75 in = 4.67 in.
  6. Code check (IRC R312.1.3): 3.92 in against 4 in → PASS.
  7. Order: 17 × 1 section(s) × (1 + 5%) = 17.85 → 18.
  8. Fasteners: 34 screws, 0 brackets and 0 tubes of adhesive.

Baluster Spacing Calculator by Ivorytool, free tools that run in your browser.